Schneider Electric Servo motor BMH1904P22F2B BMH1904P22F2B 100 Nm 40 A 40 A Shaft diameter: 38 mm
EAN:
Part number:
Item no:
Datasheet (PDF)
Technical specifications
- Starting torque ratio: 0
- Starting current ratio 0
- Number of phases: 3
- Shaft end design: Other
- Design: Other
- Load cycle: Other
- Rated frequency 50-60 Hz
- Rated voltage: 480 V
- Rated current 40 A
- Operating temperature 0-20 °C
- Suitable for frequency control: No.
- Intrinsic safety (IS): Without
- Insulation class IEC: Other
- Breakdown torque ratio: 0
- Cooling method: Other
- Storage: Other
- With condensation protection: No.
- With positive temperature coefficient resistor (PTC): No.
- With resistance thermometer detector (RTD): No.
- Motor energy efficiency class: Other
- Voltage type AC/DC
- Vacuum pressure impregnation (VPI): Other
- Housing material: Other
- Overload capability: No.
- Product type
Servo motor
- Angle
90°
- Shaft Ø
38 mm
- Flange size
190 mm
- Holding torque
100 Nm
- Max. phase load
40 A
- Shaft Ø
38 mm
- Manufacturer part #
BMH1904P22F2B
- Type
BMH1904P22F2B
- Phases
3
- Nominal torque
100 Nm
- Nominal power
9.8 kW
- Nominal voltage
480 V
- Nominal current
40 A
IP65
- Max. ambient temperature
20 °C
- Min. ambient temperature
0 °C
- Type
Three-phase synchronous motor
- Number of pins
10
- UKCA
not relevant
Documents & Downloads
Datasheet
Datasheet 3763366 Schneider Electric Servo motor BMH1904P22F2B BMH1904P22F2B 100 Nm 40 A 40 A Shaft diameter: 38 mm
User & Safety Instructions
User & Safety Instructions 3763366 Schneider Electric Servo motor BMH1904P22F2B BMH1904P22F2B 100 Nm 40 A 40 A Shaft diameter: 38 mm
Description
BMH servo motor of the Lexium 32 servo drives series. The BMH series of three-phase AC servomotors has a mean rotor moment of inertia and is perfectly adapted for applications with high loads. Owing to the winding technology, a very high power density results in a compact design This servo has a nominal continuous stop torque of 100 Nm and achieves a peak torque of 230 Nm. Its rated speed is up to 2000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power up to 9.8 kW. The built-in encoder is designed as a multiturn with 128 periods / revolution (128x1024x4096) as SinCos Hiperface. The electrical connection is made via plug connector M40 and M23, angled and rotatable by 90°. The motor flange is 190 mm for attachment. The drive shaft has a diameter of 38 mm. The shaft end is designed to be smooth and compliant with IP65 protection. The motor housing conforms to protection class IP65. The integrated fan reduces the protection class to IP20. A holding brake is integrated. The servo amplifiers of the Lexium series LXM32 are recommended for operating the synchronous motor. To support your sustainability goals, detailed information on material content, environmental impact and recycling management is provided.
This text is machine translated.
This text is machine translated.