Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
EAN:
Part number:
Item no:
Packaging type
Piece
Product type
SSR
Control voltage (min.)
3 V DC
Control voltage (max.)
32 V DC
Switching voltage (max.)
300 V AC
Datasheet (PDF)
Number
Total (€ 88.23 / piece)
€ 88.23
plus VAT.
Only 6 Piece(s) available
Technical specifications
- Packaging type
Piece
- Product type
SSR
- Type
SSP1A475BDS
- Switching type
Zero crossing
- Connection
Ring terminal
- Control voltage (min.)
3 V DC
- Control voltage (max.)
32 V DC
- Control voltage range
3 - 32 V DC
- Switching voltage (min.)
24 V AC
- Switching voltage (max.)
300 V AC
- Current load (max.)
75 A
- Output voltage (min.)
24 V AC
- Output voltage (max.)
300 V AC
- Max. output current
75 A
IP20
- Width
45 mm
- Height
59 mm
- Depth
44 mm
- Length
45 mm
- Weight
0.1201 kg
- Permanent current (max.)
75 A
- Content
1 pc(s)
1
FALSE
75 A
DC
75 A
TRUE
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 2922406 Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
Datasheet 2922406 Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
User & Safety Instructions
User & Safety Instructions 2922406 Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
User & Safety Instructions 2922406 Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
Information
Information 2922406 Schneider Electric SSR SSP1A475BDS 75 A Switching voltage (max.): 300 V AC Zero crossing 1 pc(s)
Description
Zelio relay Semiconductor relay for mounting on a heatsink or on mounting plate. The low internal voltage drop reduces the heat loss. The factory-fitted heat sink film allows direct and clean installation without the use of heat conductive paste. The internal diagnostics enables the monitoring of the load circuit for wire break, short circuit or missing mains voltage and switching function of the semi-conductor, which is output via LED-display and fault signal output. A button enables the testing of the switching output. Switching voltage 24-300 VAC. Current 75 A. Phase 1. Behavior zero-voltage switching. Control voltage 3-32 VDC. LED indicator Dimensions 45x59x44 mm Hockey puck design. Terminals with telescopic screws make it easy to connect cables with ring eyelets and cable lugs. Special feature: Pre-fitted heat transfer film, diagnostic function of the switching output with diagnostic output and button for testing. To select the separate heat sink, you have to consider heat.
This text is machine translated.
This text is machine translated.