1/2
Senseca DX 115-00-230-L02 Needle probe -196 - +500 °C Sensor type Pt100 incl. immersion probe
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 210.08 / piece)
€ 210.08
plus VAT.
Only 1 Piece(s) available
Highlights & Details
Senseca DX 115 00 230 L02 Digital Pt100 probe, large handle, high precision (e.g. for PRO D5x)
- • 2-point factory calibration
- • Changeable
- • Fast and precise
- • Ergonomic handle with high operating temperature up to 120 °C.
- • Robust for many years of professional use
- • Easy to clean
- • Water resistant according to IP 67
- • Optional DAkkS/ACCREDIA certification available
Technical specifications
- Accuracy - ±0.05 °C (t = 0 °C), ±0.1 °C (0 °C ≤ t ≤ 100 °C), ±0.2 °C (-50 °C ≤ t less than 0 °C, 100 less than t ±250 °C), ≤ 0.3 °C (t = remaining range)
- OUTPUT - UART (TTL 3.3V)
- Product type
Needle probe
- Max. temperature
+500 °C
- Basic accuracy
0.1 %
- Accuracy ± °C
0.05 °C
- Sensor type
Pt100
Manufacturer's standards (no certificate)
- Sensor version
detachable
- Response time
3 s
- Resolution (temperature)
0.01 °C
- Features
incl. immersion probe
- Probe length
230 mm
- Weight
368 g
- Calibration range
Temperature
- Reading category
Ohne Messkategorie
- Min. temperature
-196 °C
- Type
DX 115-00-230-L02
Documents & Downloads
Datasheet
Datasheet 3410755 Senseca DX 115-00-230-L02 Needle probe -196 - +500 °C Sensor type Pt100 incl. immersion probe
User & Safety Instructions
User & Safety Instructions 3410755 Senseca DX 115-00-230-L02 Needle probe -196 - +500 °C Sensor type Pt100 incl. immersion probe
Description
DX 115 is a high precision, digital, wire wound Pt100 temperature sensor for the PRO D01 / PRO D05
Hand measuring devices.
The sensor is factory calibrated and is immediately ready for use. Optionally, it can be equipped with a
DAkkS/ACCREDIA calibration certificate.
The calibration data is stored in the sensor so that it can be exchanged without recalibration.
The digitization electronics integrated in the plug housing minimizes the effects of temperature,
Including 4-wire technology and thermal voltage compensation.
The user can set the sensor at two points (offset and slope) or by setting R0
(Sensor resistance at 0°C) and adjust the Callendar Van Dusen parameters.
Supplied with 1, 2 or 5 m cable with 4-pin M12 connector.
This text is machine translated.
Hand measuring devices.
The sensor is factory calibrated and is immediately ready for use. Optionally, it can be equipped with a
DAkkS/ACCREDIA calibration certificate.
The calibration data is stored in the sensor so that it can be exchanged without recalibration.
The digitization electronics integrated in the plug housing minimizes the effects of temperature,
Including 4-wire technology and thermal voltage compensation.
The user can set the sensor at two points (offset and slope) or by setting R0
(Sensor resistance at 0°C) and adjust the Callendar Van Dusen parameters.
Supplied with 1, 2 or 5 m cable with 4-pin M12 connector.
This text is machine translated.
Scope of delivery
- Immersion probe Ø3 mm
- 230 mm
- 2 m PVC cable, -20 ... +105 °C