Sunset 56110 Sunstar-1, Solar-Control Vent 2, Connect-Fix-Set, Montage-Set PV absorber (L x W) 323 cm x 120 cm

Environmentally friendly and economical heating of swimming pools and swimming pools!
With this high-quality and effective solar kit you can make your bathing season earlier and extend. The swimming pool absorber solar system is applicable everywhere where the bathing fun them at the right temperature. No matter whether in the free or indoor swimming pool.
The system is easy to install and virtually maintenance-free. The components are made from sturdy polypropylene and thus resistant to pool chemicals such as chlorine. For simple mounting the absorber is included in the scope of a roof mounting kit included. If a roof mounting is not possible, the absorber, e.g. on a flat roof or in the garden horizontal (slight tilt necessary) to be installed.
The Solar Swimming pool system is in the nozzle pipe (pressure line) of the swimming pool. The purified pool water coming from the filter system, flows through the absorber surface and because of the solar radiation heats up. With the correct plant design your swimming pool absorber system pays itself off in 3 to 5 years under normal operating conditions, i.e. exceptionally fast, not to mention from the bathing fun.

System with electrically-controlled 2-way change-over valve.
As soon as the set temperature difference between absorber field and pool water is reached, the control the two-way valve on flow absorber field (two-way valve). Then a part of the pool water through the absorber field, warms up and flows on the shortest way to the pool. If the temperature drops in the absorber box below the set temperature difference from, the two-way valve again and bypasses the absorber field.

This text is machine translated.