SWG 19910606016 Wood screw 6 mm 60 mm Spline drive Steel zinc plated 50 pc(s)
EAN:
Part number:
Item no:
Highlights & Details
Wood screw TK 6 X 60, TG, VZ
- Material: Steel
- Surface: Galvanised
- ETA-21/0768th
- Head shape: Disc head
- Thread-shaped: Coarse thread
- Thread execution: Part thread
Technical specifications
- Product type
Wood screw
- Drive
Spline drive
- Material
Steel
- (Ø)
6 mm
- Length
60 mm
- Head shape
Elevator head
- Dim
(Ø x L) 6 mm x 60 mm
- Content
50 pc(s)
- Material properties
zinc plated
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3428498 SWG 19910606016 Wood screw 6 mm 60 mm Spline drive Steel zinc plated 50 pc(s)
Description
Wooden screws TX face plate, partial thread, galvanized
TX drive:
Good power transmission through six force attack surfaces (line contact), no drive-out effect (cam-out effect is omitted through cylindrical form), thus long life-span of bit, machine processing is possible, good torque transmission
Elevator head:
A smaller number of screws is required because stronger sealing of joints (even for deformed wood), high tightening and head tightening values, high utilization of tensile load capacity, faster processing time, since no additional washer is necessary
Lower head reinforcement:
User-safety through highest resistance against tearing
Partial thread:
Optimum processing result by a tight sealing of the upper layer of wood
Shaft cutter (friction part):
Less friction on the screw shaft ensures tool-protecting processing, less energy and effort because it works like a drill, reduction of the insertion resistance, easy to use long screws
Coarse thread:
Always brings the optimum processing speed for each screw length, faster screwing through thread geometry leads to time savings during processing
High-quality hardened steel:
High breaking torque, highest processing quality
Anti-friction coating:
Less power and effort needed because of the easy turn-in and low screw-in resistance
Cutting notch:
Less cutting forces due to drilling effect, reduced clearance angle of the wood makes possible cross-section screwing; machining of the wood fibers
This text is machine translated.
TX drive:
Good power transmission through six force attack surfaces (line contact), no drive-out effect (cam-out effect is omitted through cylindrical form), thus long life-span of bit, machine processing is possible, good torque transmission
Elevator head:
A smaller number of screws is required because stronger sealing of joints (even for deformed wood), high tightening and head tightening values, high utilization of tensile load capacity, faster processing time, since no additional washer is necessary
Lower head reinforcement:
User-safety through highest resistance against tearing
Partial thread:
Optimum processing result by a tight sealing of the upper layer of wood
Shaft cutter (friction part):
Less friction on the screw shaft ensures tool-protecting processing, less energy and effort because it works like a drill, reduction of the insertion resistance, easy to use long screws
Coarse thread:
Always brings the optimum processing speed for each screw length, faster screwing through thread geometry leads to time savings during processing
High-quality hardened steel:
High breaking torque, highest processing quality
Anti-friction coating:
Less power and effort needed because of the easy turn-in and low screw-in resistance
Cutting notch:
Less cutting forces due to drilling effect, reduced clearance angle of the wood makes possible cross-section screwing; machining of the wood fibers
This text is machine translated.
Scope of delivery
- 50 PC. Wood screw TK 6 x 60, TG, VZ