1/2
Tamiya 87061 Model making - primer Spray can Colourless Content 100 ml
EAN:
Part number:
Item no:
Number
Total (1 l = € 75.50)
€ 7.55
plus VAT.
Only 6 Piece(s) available
Highlights & Details
Primer spray metal colorless 100 ml
- The perfect surface
Technical specifications
- Factory colour
Colourless
- Product type
Model making - primer
- Container
Spray can
- Content
100 ml
Documents & Downloads
Security datasheet
Security datasheet 1534574 Tamiya 87061 Model making - primer Spray can Colourless Content 100 ml
Signal word
Danger
GHS / H Statements
- H 222: Extremely flammable material
- H229: Pressurized container: may burst if heated
- H 318: Causes serious eye damage
- H 336: May cause drowsiness or dizziness
GHS / P Statements
- P 102: Keep away from children
- P 210: Keep away from heat/sparks/open flames/hot surfaces – No smoking
- P 211: Do not spray on an open flame or other igntion source
- P 251: Pressurized container – Do not pierce or burn, even after use
- P 410+412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P 280: Wear protective gloves/protective clothing/eye protection/face protection
- P 304+340: IF INHALED: Take person into fresh air and keep at rest in a position comfortable for breathing
- P 305+351+338: CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if applicable/possible. Continue rinsing
- P 310: Contact Poison Control Center or seek medical advice immediately
Description
Extremely fine spray primer - the first step for a perfect finish. High covering and adhesive force without the model details to lock. Minor scratches and bumps, the primer/primer. This is in various container sizes (100ml/180ml) and colors available.
The Primers are suitable for the following surfaces/materials: plastic (ABS, polystirene (PS)), metal (steel, aluminum, Die-Cast (zinc die casting)), wood, ceramics.
The Primed surface can be before the color application also wet locking or sanded down. For this purpose, we recommend the TAMIYA sandpaper and sanding sponges, these are dry and wet can be used as well as in grains from 320 to 3,200.
This text is machine translated.
The Primers are suitable for the following surfaces/materials: plastic (ABS, polystirene (PS)), metal (steel, aluminum, Die-Cast (zinc die casting)), wood, ceramics.
The Primed surface can be before the color application also wet locking or sanded down. For this purpose, we recommend the TAMIYA sandpaper and sanding sponges, these are dry and wet can be used as well as in grains from 320 to 3,200.
This text is machine translated.