Wera 05004511001 05004511001 Hex head profile Bits Holder 14 mm 1/4" 14 mm 1-piece 1/4"
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 10.08
3
6% = € 0.58
€ 9.50
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 10.08 / piece)
€ 10.08
plus VAT.
Only 5 Piece(s) available
Technical specifications
- Product type
Bits
- Drive
1/4"
- Spanner size
14 mm
- Ratchet bits (inch)
1/4"
- Size
14 mm
- Downforce
Hex head profile
- Length
50 mm
- Material
Chromium-vanadium steel
- Screwdriver features
Holder
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2180034 Wera 05004511001 05004511001 Hex head profile Bits Holder 14 mm 1/4" 14 mm 1-piece 1/4"
Description
Long 1/4" hand and machine socket wrench set (ISO 2725 - Part 3) with ball-catcher groove; for hexagon head screws and nuts. For use in the hand and machine operation (non-impact) even in deep-lying screw fittings and protruding threaded rods. Take it easy tool finder with color coding according to size for easy and fast to find the required tool. Handy for easy access even with oily hands. With hexagonal profile. The hexagonal profile enables the transmission of high forces and the load on the edges of the nut or of the screw head is less than a 12-section profile. Fine-toothed ratchet make in addition by their small return angle of the use of twelve square profile even in cramped spaces unnecessary.
This text is machine translated.
This text is machine translated.
Features
- Long socket wrench for deep-lying screw fittings and partly also during the protruding threaded rods in narrow spaces
- Hexagonal profile allows precise screwing with high power transfer and also protects the profile
- With Tool Finder Take it easy: color coding according to large
- Knurling at the rear end for high grip even in manual operation
- For the hand and machine control (non-impact), with ball-catcher groove