Whadda WPI452 Expansion board 1 pc(s) Compatible with (development kits): Arduino
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 10.08
3
6% = € 0.58
€ 9.50
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 10.08 / piece)
€ 10.08
plus VAT.
Only 2 Piece(s) available
Technical specifications
- Product type
Expansion board
- Compatible with
Arduino
- Suitable for
Arduino
- Tool type
Expansion board
- No. of outputs
4 x
- Compatible with
Arduino
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2481863 Whadda WPI452 Expansion board 1 pc(s) Compatible with (development kits): Arduino
Description
With this breakout board, you can connect a digital system (like a 5V microcontroller) to a high voltage or a low voltage system. It uses the TLP281 opto-isolator IC to electrically isolate your controller with the four built-in LEDs and photodiodes from the high voltage system.
The TLP281-IC is often used with a microcontroller to control servos or other motors that use a higher voltage than the TTL logic on a 3.3V or 5V development board.
This breakout card allows up to 4 channels to be controlled. Simply connect your microcontroller to the 4-pins and supply the board with a maximum of 5VDC to the NC PIN. The high voltage system is connected to the HVCC & HGND pins and the OUT pins.
This text is machine translated.
The TLP281-IC is often used with a microcontroller to control servos or other motors that use a higher voltage than the TTL logic on a 3.3V or 5V development board.
This breakout card allows up to 4 channels to be controlled. Simply connect your microcontroller to the 4-pins and supply the board with a maximum of 5VDC to the NC PIN. The high voltage system is connected to the HVCC & HGND pins and the OUT pins.
This text is machine translated.