Digitus DN-19 26U-6/6-DB 19" server rack cabinet (W x H x D) 600 x 1330 x 600 mm 26 U Black, Black (RAL 9005)

Digitus 19 inch network cabinet 26 HE - Dynamic Basic - 1155x600x600 mm - black

The Dynamic Basic cabinets are designed for the user-friendly installation of active and passive network components along with clean cabling. Each cabinet is made of steel sheet up to 1.5 mm thick and provides for a very good stability as a robust steel construction due to special sheet metal bending technology. The coloring is done by powder coating in the colors gray (RAL 7035) and black (RAL 9005). In special cases, the cabinets can be dismantled to reach difficult-to-access sites. The doors can be easily dismantled, a door stop can be changed. Furthermore, the roof is prepared for the intake of a fan module for active ventilation. The cabinets contain 2 pairs (4 pieces) mounted 483 mm (19") profile rails inside. These are galvanized and marked with the height unit (can be counted in both directions). They can be adjusted in depth and are additionally connected with deep struts in the cabinet to enable intensive removal with 483 mm (19") components. Cable management is an important aspect of the installation. Each cabinet is equipped with a cut-out cable inlet with cover plate in the floor. The floor in cabinets with widths of 800 mm and above is additionally extended with punched cable inlets with plastic cover on the left and right. These 1x are located in the roof for cabinets with a width of 600 mm and a width of 3x from 800 mm. A widely available portfolio of accessories for cable routing, shelves, etc. helps to meet many requirements of daily practice.

This text is machine translated.

Highlights & Details

• Roof is prepared to accommodate a fan element (punched-out slots)
• Lockable pivot lever handle on the front door
• Floor with punched cable inlet, covered with screwed plate

Facts

• Protection class: IP20
• Front door made of side metal struts with safety glass
• Locking system with pivot lever handle on front door
• 120° door opening angle
• 1-point locking on the front door
• The rear wall and side walls are detachable and can be closed
• Includes 4 leveling feet, which are already attached under the cabinet
• 483 mm (19") profile rails mounted on the front and rear inside the cabinet, galvanized
• 483 mm (19") profile rails are adjustable in depth and marked with the height unit
• Floor with punched cable inlet, covered with screwed plate
• Punched cable inlets with plastic cover in the roof
• Roof is prepared to accommodate a fan element (punched-out slots)
• Various ground points in the cabinet for installation components
• Incl. Installation kit (screws, cage nuts, washers)
• Supplied fully assembled

Comments

Please provide a phone number when placing your order, to allow us to arrange for a delivery date.