Finder 50.12.9.024.4000 PCB relay 24 V DC 8 A 2 change-overs 1 pc(s)
PCB relay with positively guided contacts according to EN 50205: 2002 Type B with 2 changeover contacts (According to EN50205: 2002 as positively driven contacts may only BE USED AS OPEN contact and 11-12 and 21-24 or 21-22 and 11-14 closed contact.…
- Warranty: 24 months
- Manufacturer: Finder
PCB relay with positively guided contacts according to EN 50205: 2002 Type B with 2 changeover contacts (According to EN50205: 2002 as positively driven contacts may only BE USED AS OPEN contact and 11-12 and 21-24 or 21-22 and 11-14 closed contact.…
- Warranty: 24 months
- Manufacturer: Finder
Technical data
- AC1 switching capacity: 2000 VA.
- AC15 switching capacity: 230 AC.Max 500 VA
- 1-phase motor AC3, operation 230 V / AC: 0.37 kW
- Switching current DC 1: (30/110/220 V):Max 8 mm (0.65 / 0.2 ")
- Switching load (5 V/5 mA): Min 300 mW
- Underground between coil and contacts (1.2/50 microseconds): 6 kV
- DC coil operating range: 0.75 - 1.2 Un
Type | 50.12.9.024.4000 |
---|---|
Coil nominal voltage | 24 V DC |
Min. pick-up voltage | 18 V DC |
Max. pick-up voltage | 28.8 V DC |
Control mode | monostable, 1 coil |
R(coil) | 750 Ω |
Contact type | 2 change-overs |
Contact material | AgNi |
Switching voltage (max.) | 400 V AC |
Switching current (max.) | 8 A |
Max. switching capacity | 2000 VA |
---|---|
Creepage distance (coil/clips) | 8 mm |
Connection | Solder pins |
Electrical lifespan | 100 000 Switching cycles |
Durability | 10 million switching cycles |
Min. temperature | -40 °C |
Max. temperature | +70 °C |
Length | 29 mm |
Width | 12.4 mm |
Height | 25 mm |
Dim | (L x W x H) 29 x 12.4 x 25 mm |
Content | 1 pc(s) |
RoHS-compliant | Yes |
Type | Sefety relay |
Nominal voltage (details) | 24 V DC |
Nominal current (details) | 8 A |
Switching capacity | 8 A |
Switching current | 8 A |
Dielectric strength | 2500 V |
Type | 50.12.9.024.4000 |
Ambient temperature | -40 - +70 °C |
Air/creeping distance | 8 mm |
Contact type | 2 CO, DPDT |
Product type | PCB relay |
Documents & Downloads
Finder 50.12.9.024.4000 PCB relay 24 V DC 8 A 2 change-overs 1 pc(s)
PCB relay with positively guided contacts according to EN 50205: 2002 Type B with 2 changeover contacts (According to EN50205: 2002 as positively driven contacts may only BE USED AS OPEN contact and 11-12 and 21-24 or 21-22 and 11-14 closed contact. Separate arrangement of neighboring contacts. Coils for DC "Protective separation between coil and contact set according to VDE 0106, EN 50178, EN 50178, EN 60204 and EN 60335th
- Warranty: 24 months
- Manufacturer: Finder
Comments
Positive guidance is given if the contacts (in a contact record) are mechanically connected together so that is not always opening and closing, and can be closed simultaneously. Thereby, it must be ensured that contact separations of 0.5 mm are available over the entire life-span, even in the faulty state. Contact material selection: AgNi - in case of ohmic or light inductive load. AgNiAu (hard gold-plated) - in case of contact currents < 20 mA. AgSnO2 (silcer-tin oxide) - for switch-on currents till 100 A (< 5 ms) e.g. in case of lamp loads. Approvals: IMQ, TÜV, cRUus.Frequently bought together
Customer reviews
Similar products
See and discover other items from category PCB Mount Relays, Plug-in Relays