1/2
Joy-it sen-mq7 Carbon monoxide detector 1 pc(s) Compatible with (development kits): Raspberry Pi®, Arduino
EAN:
Part number:
Item no:
Datasheet (PDF)
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 3.61
10
7% = € 0.27
€ 3.34
25
11% = € 0.38
€ 3.23
Volume discounts vary depending on the seller
You save € 0.00
Total (€ 3.61 / piece)
€ 3.61
plus VAT.
Highlights & Details
Analogueue carbon monoxide sensor
- Carbon monoxide (CO) sensor
- Low temperature detection
- Sensitivity can be regulated
- Measuring range 300 . 10,000 ppm
Technical specifications
- Measurement range 300 - 10,000 ppm
- Measurable substances Carbon monoxide (CO)
- Application areas recognize gas leaks, for
- Gas alarm, robotics, microcontroller projects
- Compatible with Raspberry Pi (with ADconverter),
- Arduino, etc.
- Special features high sensitivity, which
- With the potentiometer
- can be customized,
- Low Temperature
- Detection of gas
- Dimensions 52 x 20 x 13 mm
- Analogue output Evaluation of the measured values
- From the microcontroller
- Digital output (with potentiometer)
- Threshold setting
- possible
- Pins:
- VCC
- GND
- AOUT
- DOUT
- Power supply 5V
- Earth
- Analogueue output
- Digital output
- Loop voltage 10 V DC
- Heating voltage 5.0 V ± 0.2 V
- Heating resistor 31 Ω ±3Ω (room temperature)
- 350 mW heating power
- Surface resistance of the sensitive
- Materials
- 2 -20 KΩ in 100ppm CO
- Operating temperature -20 - 50 °C.
- Packaging type
Piece
- Product type
Carbon monoxide detector
- Compatible with
Arduino
- Interfaces
Analogue
- Max. operating voltage
5 V
- Suitable for
Raspberry Pi®
- Tool type
Tester
- Height
13 mm
- Length
52 mm
- Width
20 mm
- Internal ports
Pin header
- No. of outputs
2 x
- Compatible with
Raspberry Pi®
Arduino
Documents & Downloads
Datasheet
Datasheet 2205379 Joy-it sen-mq7 Carbon monoxide detector 1 pc(s) Compatible with (development kits): Raspberry Pi®, Arduino
User & Safety Instructions
User & Safety Instructions 2205379 Joy-it sen-mq7 Carbon monoxide detector 1 pc(s) Compatible with (development kits): Raspberry Pi®, Arduino
Description
This analogueue gas sensor has
a small heating element with
an electronic-chemical sensor.
It is
suitable for indoor use.
Measurable substances: Carbon monoxide (CO)
The sensitivity of the sensor can be adjusted via a potentiometer. For example, you can set a threshold that triggers a gas alarm.
This text is machine translated.
a small heating element with
an electronic-chemical sensor.
It is
suitable for indoor use.
Measurable substances: Carbon monoxide (CO)
The sensitivity of the sensor can be adjusted via a potentiometer. For example, you can set a threshold that triggers a gas alarm.
This text is machine translated.
Scope of delivery
- Sensor module