Joy-it sen-pressure10 1 pc(s) Compatible with: Arduino, Asus, ASUS Tinker Board, Banana Pi, BeagleBoard, BeagleBone, C

  • Item no.: 2205376
  • Manufacturer no.: sen-pressure10
  • EAN: 4250236820019

This pressure sensor worksBy means of the analogueue detectionOf resistance if pressure ofAffects the outside of the sensorThe resistance and thusThe voltage of the analogueSignals. The sensor is highly sensitive,Flexible and the sensor stripsis wate…

  • Warranty: 24 months
  • Manufacturer: Joy-it
  • Item no.: 2205376
  • Manufacturer no.: sen-pressure10
  • EAN: 4250236820019

This pressure sensor worksBy means of the analogueue detectionOf resistance if pressure ofAffects the outside of the sensorThe resistance and thusThe voltage of the analogueSignals. The sensor is highly sensitive,Flexible and the sensor stripsis wate…

  • Warranty: 24 months
  • Manufacturer: Joy-it
  • Measurement range 0 - 10 kg
  • Thickness of sensor strip less than 0.25 mm
  • Fields of application Robotics, Microcontroller projects
  • Compatible with Raspberry Pi, Arduino, etc.
  • Special features of high sensitivity,
  • Flexible, waterproof sensor strips,
  • no electromagnetic
  • Interference or static discharge
  • Dimensions 75 x 20 x 9 mm
  • Output of the measurement result of analogue voltage value
  • Response sensitivity from 20 grams
  • Accuracy + - 2.5%
  • Response time less than 1 ms
  • Recovery time less than 15 ms
  • Pins:
  • +
  • I
  • S
  • Power supply 3.3 - 5V
  • Earth
  • Analogue Output
  • Operating temperature -20 - 60 ° C.
  • Service life at least 100000 measurements
Interfaces 3-core
Min. operating voltage 3.3 V
Max. operating voltage 5 V
Height 9 mm
Length 75 mm
Width 20 mm
Internal ports Pin header
Compatible with Arduino , Asus , ASUS Tinker Board , Banana Pi , BeagleBoard , BeagleBone , C-Control , Calliope , Cubieboard , Grove , micro:bit , pcDuino , Raspberry Pi , Rock Pi , TinkerForge , Unipi
Suitable for Arduino , micro:bit , Raspberry Pi®

Technical data

  • Measurement range 0 - 10 kg
  • Thickness of sensor strip less than 0.25 mm
  • Fields of application Robotics, Microcontroller projects
  • Compatible with Raspberry Pi, Arduino, etc.
  • Special features of high sensitivity,
  • Flexible, waterproof sensor strips,
  • no electromagnetic
  • Interference or static discharge
  • Dimensions 75 x 20 x 9 mm
  • Output of the measurement result of analogue voltage value
  • Response sensitivity from 20 grams
  • Accuracy + - 2.5%
  • Response time less than 1 ms
  • Recovery time less than 15 ms
  • Pins:
  • +
  • I
  • S
  • Power supply 3.3 - 5V
  • Earth
  • Analogue Output
  • Operating temperature -20 - 60 ° C.
  • Service life at least 100000 measurements
Interfaces 3-core
Min. operating voltage 3.3 V
Max. operating voltage 5 V
Height 9 mm
Length 75 mm
Width 20 mm
Internal ports Pin header
Compatible with Arduino , Asus , ASUS Tinker Board , Banana Pi , BeagleBoard , BeagleBone , C-Control , Calliope , Cubieboard , Grove , micro:bit , pcDuino , Raspberry Pi , Rock Pi , TinkerForge , Unipi
Suitable for Arduino , micro:bit , Raspberry Pi®

Frequently bought together

Similar products

See and discover other items from category Breakout Boards