Mean Well HDR-100-24N Rail mounted PSU (DIN) 24 V DC 4.2 A 100.8 W No. of outputs:1 x Content 1 pc(s)

MEANWELL power supply series HDR-100-24 DIN-Rail Mounting Single Output 1-phase power: 100 W

Mean corrugated has its rail power supplies (DIN-rail) of the series HDR the Type HDR-100 with 100 W power. Especially in the building automation and building control, the power supplies for use, since they all comply with protection class II The HDR-family of MEAN CORRUGATED has a step-shaped plastic housing, has an input voltage range of 85 to 264 VAC (also available) and offers 277 VAC models with 5 V, 12 V, 15 V, 24 V and 48 V.
Thanks to the slim design measures the height of all power supplies only 90 mm, the width 4 SU (70 mm). They can be used on the standardised DIN rail TS-35/7.5 and TS-35/15. To their properties also include a low no-load consumption of less 0,3W, a high degree of efficiency up to 91% and an adjustable DC output voltage as well as a wide operating temperature range (-30 to +70 °C). Also a LED display for operation is available.
The HDR-series of MEAN CORRUGATED meets the requirements of European Standard EN61000-3-2 class A, as well as all safety regulations according to UL 60950-1, UL508 and EN 61558-2-16.
You can find the power supplies for use in the industrial control and in electromechanical devices.

This text is machine translated.

Highlights & Details

• Directly on the DIN-rail mountable
• Closed design, touch-proof screw terminals
• Universal input
• Protected against short circuit, overload, over voltage
• Low idle power
• LED display for power-on
• Insulation category II

Facts

• Directly on the DIN-rail mountable
• Closed design, touch-proof screw terminals
• Universal input
• Protected against short circuit, overload, over voltage
• Low idle power
• LED display for power-on
• Insulation category II

Comments