Phoenix Contact 2320186 Rail mounted redundancy (DIN) 40 A No. of outputs: 1 x

Redundancy module, with protective coating QUINT-ORING/24DC/2X20/1X40

QUINT ORING is the active redundancy module from the QUINT POWER product family that can be mounted on a mounting rail.
With the help of the redundancy module, two power supplies of the same type that are connected in parallel on the output side for redundancy can be fully isolated from each
other.
Redundant systems are used in systems that demand particularly high requirements for the reliability. The power supplies involved are sized so that the total current requirement for all consumers can be covered by one power supply
alone.
If the total requirements increases beyond the nominal current of the power supplies to be supplied as a result of additional installed loads, for example, the power supply system is no longer redundant. Likewise, a defect in the power supply or in the wiring can lead to the loss of redundancy.
This can be detected immediately via a floating signal contact and a corresponding LED.
The Auto Current Balance (ACB) technology allows uniform distribution of the load current across the connected power supplies so that the life of the redundant system can be significantly increased.

Highlights & Details

• Low-loss isolation of power supplies switched in parallel
• Preventive function monitoring
• Auto Current Balance technology

Comments