Raspberry Pi® A+ 256 MB 1 x 0.7 GHz Raspberry Pi®
- Item no.: 1299810
- Manufacturer no.: RP-A+
- EAN: 4016138951677
The Model A+ is the low-cost variant of the Raspberry Pi. It replaced the original Model A in November 2014. Compared to the Model A it has:· More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as th…
- Warranty: 24 months
- Manufacturer: Raspberry Pi®
- Item no.: 1299810
- Manufacturer no.: RP-A+
- EAN: 4016138951677
The Model A+ is the low-cost variant of the Raspberry Pi. It replaced the original Model A in November 2014. Compared to the Model A it has:· More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as th…
- Warranty: 24 months
- Manufacturer: Raspberry Pi®
Technical data
| Type | Raspberry Pi® A+ |
|---|---|
| SoC | Broadcom BCM2835 |
| Processor | ARM 11 |
| Processor cores (No.) | 1 x |
| GPU | Broadcom Video Core IV |
| RAM | 256 MB |
| Clock speed | 0.7 GHz |
| Memory type | DDR2 |
| Operating system (Version) | w/o OS |
| Internal ports | CSI (camera) , DSI (display) , GPIO (40-pin) |
| External ports | 1x USB 2.0 , 3.5 mm jack , HDMI™ , micro SD , micro USB (current) |
|---|---|
| Wi-Fi | no |
| Power supply (LOV) | via USB |
| Output voltage (min.) | 5 V DC |
| Output current | 0.7 A |
| Length | 65 mm |
| Width | 56 mm |
| Product type | SBC |
Raspberry Pi ® Model A+
The Model A+ is the low-cost variant of the Raspberry Pi. It replaced the original Model A in November 2014. Compared to the Model A it has:
· More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model A and B.
· Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
· Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
· Better audio. The audio circuit incorporates a dedicated low-noise power supply.
· Smaller, neater form factor. We’ve aligned the USB connector with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes. Model A+ is approximately 2cm shorter than the Model A.
We recommend the Model A+ for for embedded projects and projects which require very low power, and which do not require Ethernet or multiple USB ports.
Highlights & Details
- MicroSD card slot
- Up to 30% less power consumption by switching regulator
- Enhanced audio quality
- 3.5Mm Audio socket replaced RCA Composite connection was
- Board is 2 cm shorter than the previous version
Facts
- Broadcom BCM2835 700 MHz ARM1176JZFS processor with FPU and video core IV, Dual Core, 128 KB L2 cache, 250 MHz · GPU offers Open GL ES 2.0, OpenVG with hardware acceleration and 1080p30 H.264 High-profile decoding · GPixel GPU allows 1/s, 1.5 GTexel/s or 24 GFLOPs with texture filtering and DMA infrastructure · 256 MB RAM · Starts from an SD card, the running a version of the Linux operating system (not included) · HDMI Video jack, HDMI 1.3a · 1x USB 2.0 socket · Power supply via micro USB · 3.5 mm socket for audio output
- · Terminal strip for GPIO and serial buses · Pin strip dimensions for JTAG-plug connector · Connector for Raspberry Pi HD video camera · 2 Status LEDs (power, SD-card access) · Power consumption: small 0.5 - 1.2 W · Size (L x W x): 65 mm x 56 mm.
- Warranty: 24 months
- Manufacturer: Raspberry Pi®
Comments
HDMI™ is a registered trademark of HDMI Licensing, LLC.Frequently bought together
Customer reviews
Similar products
See and discover other items from category Single Board Computers (SBCs)