SVS Nachrichtentechnik 00371.93 Universal wireless door opener mod kit 433 MHz

Universal Wireless mod kit SHR-7 FUGA for garage door motors including hand-held transmitter

What if there is no replacement hand-held transmitter for your previous drive?
No problem:
With the SVS conversion set SHR-7 FUGA, you not only have the option to continue using your previous wireless gate control, but also to extend it easily without expensive installations or to achieve a better range. This radio system offers you ranges of up to 600m in the open. The advantage is that you can continue to use your existing hand-held transmitters, because this system works completely independant of the wireless system of the garage door manufacturer. The installation does not require any complex modifications to the motor, nor do you change the functionality of your existing operating elements. With the universal conversion kit, your existing garage door drive is simply extended with an additional plug-in receiver.

The SVS conversion kit is installed in just two steps and is immediately ready for operation:
· Simply plug SHR-7 FUGA between the existing socket (continuous voltage 230 V/AC) and the plug of the garage door motor.
· Connect the already mounted 2m long cable to the garage door motor in parallel via the button input or on the existing key or interior button.

As such, SHR-7 FUGA acts like a button (key or internal button) and all existing buttons can still be used.

N.B.:
No installation work is required on 230 V. Please note that the button cables are not the socket contacts, but the button cables. This receiver is not suitable for direct operation of a rolling door. It must not be connected directly to a tubular or rolling gate motor, as the voltage of 230V is switched on these motors.
If you still want this, use load relays, contactors or simply our radio receiver SHR-7 L3 from the SH-7 radio series.

Your advantage:
· Manufacturer-independant and therefore suitable for all courtyard and garage door motors
· Quick and easy installation thanks to the plug-in receiver
· Ready for immediate use, since matching hand-held transmitter SHT-7 is already included in the delivery
· Learning radio receiver: Only one push of a button and the hand-held transmitter is taught in
· 6561 different coding options can be set on the hand-held transmitter
· 2 different codes (hand-held transmitter) can be taught in, with the same coding any number of hand-held transmitters can be used. With the 2. You can manage different access permissions for encoding.
· Further conversion sets can be operated with the same 3-channel hand-held transmitter SHT-7, e.g. gate and entrance gate, garage door and with the receiver compatible with the conversion set (SHR-7 L3 / 609801) even the control of the outdoor lighting.

This text is machine translated.

Highlights & Details

• Made in Germany
• Can be used universally for all garage door manufacturers
• Easy to set up
• Expandable with additional receivers or transmitters

Facts

• 3 potential-free changeover contacts: 230V AC / 6A
• λ/4-wire antenna
• Output: Cable 2-wire, approx. 2m long for connection to the button input
• Temperature range: -20°C to +65°C
• Protection class: IP44

Delivery

• Wireless socket receiver
• 3-channel hand-held transmitter SHT-7 incl. battery
• User manual.

Comments

Suitable transmitters and modules - see optional accessories.
The free-field range is only achieved under optimum conditions.
Caution: SH-7 Series products are not compatible with SH-12 Series products.