TDK-Lambda GEN60-85-3P208 19" bench PSU (adjustable voltage) 0 - 60 V DC 0 - 85 A 1 x RS232, RS485, Ethernet
This 5000 W lab power supply Genesys is a powerful ultra flat. These devices have no air slots at the top and bottom and are thus actually with 2 DB.Output voltages of up to 600V and output currents of up to 600A can be adjusted directly on the devic…
This 5000 W lab power supply Genesys is a powerful ultra flat. These devices have no air slots at the top and bottom and are thus actually with 2 DB.Output voltages of up to 600V and output currents of up to 600A can be adjusted directly on the devic…
Programmable power supply Genesys GEN-60-85-3P208
This 5000 W lab power supply Genesys is a powerful ultra flat. These devices have no air slots at the top and bottom and are thus actually with 2 DB.
Output voltages of up to 600V and output currents of up to 600A can be adjusted directly on the device or remotely via the built-in RS232/RS485 interface. But even via analog inputs can be programd all important functions (with control voltages 0-5 V/0-10V or external resistance) high-resolution 16-bit A/D and D/A-converter enable very precise settings and programming; the settings using the controls on the device (encoder) can be switched between coarse and fine adjustment.
Digital displays indicate the current values as well as various status information (including the Over Voltage Protection, Under Voltage Limit, address settings), and a monitor output provides corresponding analogue voltages (0-5V or 0-10V) for external monitoring. The device can naturally be operated as a constant voltage as well as a constant current source with automatic crossover between these operating modes. Several devices can be switched serially or in parallel. The genesys series is suitable for 19" rack mounting.
This text is machine translated.
Highlights & Details
- Synchronised
- /
- Type (misc.): Rack installation
Facts
- Integrated RS-232/RS-485 interface as standard
- External analogue programming and re-read function with 0-5V or 0-10V
- Output voltage up to 600 V, output current up to 600 A (depending on model)
- Active Power Factor Correction
- Flat design (2 units)
- 19" rack mounting
- Parallel connection of up to four devices with active current sharing
- Master/slave switching
- Car and safe start mode
- Digital Encoder for current and voltage adjustment
- Lockable front panel (also remote)
- External Remote ON/OFF switching
- Remote Sensing function to compensate the voltage drops in the output cables
Delivery
- Accessory Pack (covers, etc.)
- Manual
- Serial link cable (RS485)
Comments
This product is a component power supply considered apparatus and is only to be installed by qualified persons within other equipment and must not be operated as a stand alone product.This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
Customer reviews
Similar products
See and discover other items from category 19" Bench Power Supplies