TDK-Lambda GEN600-5.5-1P230 19" bench PSU (adjustable voltage) 0 - 600 V DC 0 - 5.5 A 3.3 kW 1 x programmable

Programmable lab power supply Genesys

The 3.3 kW model is only 2HE flat (88 mm height) and can also be stacked on top of one another directly, so requires no air slit above or below. Output voltages upto 600 V and output current upto 5.5 A can be adjusted directly at the equipment or remote controlled by means of inserted RS232/RS485-interface. About analogue inputs all important functions can be programmed (control voltage 0 5 V, 0 10 V or over external resistance; for the digital control e.g. over LabView® and LabWindows® appropriate drivers are available). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment. A dual digital display shows the current values, and various status information (andOver Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 - 5 V or 0 - 10 V) for an external monitoring The devices can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. These GEN models are suitable for mounting in 19'' racks. GEN/H models are half the structural shape.

Highlights & Details

• 88 mm
• Synchronised
• 0 - 600 V DC / 0 - 5.5 A
• Power (details) 3.3 kW
• Type (misc.): Rack installation

Comments

This product is a component power supply considered apparatus and is only to be installed by qualified persons within other equipment and must not be operated as a stand alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.