Teledyne LeCroy Probe Differential probe set 200 MHz 10:1 20 V

Teledyne LeCroy 200MHz, 3.5 pF,1 M Active Differential Probe, 20 V.

Teledyne Test Tools' new T3LVD20-200 low voltage differential probe is an active, high bandwidth, low voltage differential probe with 200 MHz bandwidth, ± 20 V (DC + Pk AC), fast and accurate waveform capture, 2% accuracy and low load on the test circuit. This probe can be used with any oscilloscope with a 50 Ω or 1 MΩ BNC input.

This text is machine translated.

Highlights & Details

• 10:1
• Bandwidth 200 MHz

Facts

• Essential featuresAccurate and simple voltage measurementsWide bandwidth of 200 MHzDifferential signal input of ± 20 V (DC + peak AC)High differential input impedance of 1 MΩ / <3.5 pFMaximum common mode voltage of ± 60 V.Combined single ended and differential measurementsUse with any oscilloscope with a 50 Ω or 1 MΩ input and BNC connectorOvervoltage protection with two displaysApplicationsEmbedded low-voltage power design and component measurementsLow-voltage entertainment electronics and household appliances Household appliancesDevelopment of photovoltaic (PV) systems for households and industry System designIndustrial and military control electronicsSingle-sided and differential buses (CAN, CAN FD, LIN, I2C, SPI, MIL-STD-1553B, UART, ARINC429, ETC.)Research and developmentUniversities, general electronics and education

Delivery

• Single Active Probe
• 2x alligator clips2x Gripper terminals2x test hooks1x BNC 50 Ω Lead-through connection adapter1x BNC output cable1x USB cable 1x wall socket USB-power supply1x Instructions for Use1x Calibration Report

Comments