VOLTCRAFT VC191 Handheld multimeter Digital CAT III 600 V Display (counts): 6000
The Voltcraft VC 191 handheld multimeter is your multimeter with top features in the compact VC 100 series. Impedance switchingThe LoZ function allows you to measure AC voltages with low impedance. Due to the lower internal resistance of the measurin…
The Voltcraft VC 191 handheld multimeter is your multimeter with top features in the compact VC 100 series. Impedance switchingThe LoZ function allows you to measure AC voltages with low impedance. Due to the lower internal resistance of the measurin…
VC191
The Voltcraft VC 191 handheld multimeter is your multimeter with top features in the compact VC 100 series. Impedance switchingThe LoZ function allows you to measure AC voltages with low impedance. Due to the lower internal resistance of the measuring device, deviations from measurements due to stray and ghost voltages are reduced. Switchable low pass filter (LPF)For digitally controlled motors, unwanted modulated control signals are ignored for measurement. Delta measurementFor measuring deviations of a specified value. So you can focus on the positive and negative changes and don't have to reckon constantly.Duty cycleAlso known as duty cycle or duty cycle allows the percentage value between ON (impulse) and OFF to be determined for phase control, switching power supplies and other digitally switched devices.Min MaxThe highest and lowest values of a measurement series are saved and displayed.Start-up tipsVery short signal events that last just a millisecond are reliably logged. Razor-sharp display Impressive, clearly readable EBTN display in Heller environment as well as also in darkness. With 5.6 cm (2.2 inch) display diagonal, all digits and symbols are displayed much larger and reading errors are avoided. Display and key protectionSubtly incorporated edges protect the display, the rotary switch and all keys.A elaborately produced 2-component housing with integrated soft rubber protection not only provides grip, but also protects the measuring device even in harder applications.Anti-tippingThe broad base made of soft rubber provides for a much more stability with the foot folded out. Non-slipLying and standing with connected measuring lines - the measuring device remains in position. When stored without test leads, the rubberized edge protection prevents slipping even when the measuring device is on the display side.Built-in torchThe way in the dark to the fuse box can be found more easily with the built-in LED light.Non-contact voltage detectionAn NCV sensor is integrated in the front of the housing. The electromagnetic field is detected, which is generated by a cable under voltage. For example, you can find the position that leads to an interruption in a squeezed extension cable. Through the insulation.Exact measured values through True RMS real effective value measurementTrue RMS measurement enables reading of asymmetrical voltage and amperage with wave forms other than a sinus. Asymmetric voltages are very common in various types of dimmers, speed limiters, synchonised switches, pulse-type chargers, or scale model speed controllers. Which means that in these cases conventional meters displaying average readings are prone to large measurement errors.Removable protective capsThe measuring tips are optimally protected against contact. If required, a protective cap can be removed to measure e.g. in luster terminals.Wear indicator of the measuring lineThe leads feature two layers of insulation, each in a different colour. If the first insulating layer is damaged, a different colored insulation appears. Ideal for training equipment, in order to change worn measuring lines early.Factory calibration ensures accurate readingsCalibration according to manufacturer standards is part of Voltcraft Quality Assurance. This ensures high quality products and compliance with tolerance limits as outlined in the user manual. This does not include certification.
This text is machine translated.
Highlights & Details
- CAT III 600 V
Facts
- AC/DC voltage measurement
- AC/DC current measurement up to 10 A.
- Resistance measurement
- Capacitance testing
- Temperature reading
- Frequency measurement
- Duty cycle
- Diode test
- Acoustic Continuity tester
- Low pass filter (V/AC)
- PEAK acquisition
- LoZ function (low impedance V/AC)
- Reference value settings
- Hold function
- Low-battery indicator
- Robust casing with protective rubber coating.
- Auto power-off.
- Backlit display
Delivery
- Multimeters1 x 9 V battery1 pair of test leadsK-type temperature sensorUser manual.
Comments
Customer reviews
Similar products
See and discover other items from category Multimeters