Image similar
Image similar
Wima DCP4P045006ID2KSSD 1 pc(s) MKP thin film capacitor Radial lead 5 µF 1100 V DC 20 % 37.5 mm (L x W x H) 41.5 x 20 x
EAN:
Part number:
Item no:
Packaging type
Piece
Product type
MKP thin film capacitor
Type
Radial lead
Capacity (elec.)
5 µF
Nominal voltage
1100 V DC
Datasheet (PDF)
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 3.61
10
7% = € 0.27
€ 3.34
25
11% = € 0.38
€ 3.23
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 3.61 / piece)
€ 3.61
plus VAT.
14-day return policy included
Highlights & Details
DC LINK MKP 4
Our service for you
Technical specifications
- Jacketing: Solvent-resistant, flame-inhibiting plastic casing with epoxide-resin cast, UL 94 V-0
- Insulation value: at +20 °C ≥ 100000 s (mean value)
- Loss factors: at +20 °C ≤ 10 x 10-4 at 1 kHz
- Packaging type
Piece
- Product type
MKP thin film capacitor
- Type
Radial lead
- Dim
(L x W x H) 41.5 x 20 x 39.5 mm
- Capacity (elec.)
5 µF
- Nominal voltage
1100 V DC
- Tolerance ±
20 %
- Material
Polypropylene
- Connection
Solder pins
- Length
41.5 mm
- Width
20 mm
- Height
39.5 mm
- CS
37.5 mm
- Min. temperature
-40 °C
- Max. temperature
+85 °C
- Content
1 pc(s)
- Dielectric
Polypropylene (PP) film
- RoHS-compliant
Yes
- Type
DCP4P045006ID2KSSD
- Type
4-wire version
- Nominal voltage (details)
1100 V AC
- Temperature range
-40 - +85 °C
- Dielectric
Polypropylene (PP) film
Documents & Downloads
Datasheet
Datasheet 444012 Wima DCP4P045006ID2KSSD 1 pc(s) MKP thin film capacitor Radial lead 5 µF 1100 V DC 20 % 37.5 mm (L x W x H) 41.5 x 20 x
User & Safety Instructions
User & Safety Instructions 444012 Wima DCP4P045006ID2KSSD 1 pc(s) MKP thin film capacitor Radial lead 5 µF 1100 V DC 20 % 37.5 mm (L x W x H) 41.5 x 20 x
Description
These condensers are used in the intermediate circuit applications of power electronics e.g. in conversion technology, where they are increasingly displacing the currently used electrolytic capacitors owing to increasing electrical requirements.
They are designed on the basis of a low-loss polypropylene film and show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, it is also characterised by:
- Very high volume capacity
- High rated voltage per element
- Very low loss factor (ESR)
- Very high insulation resistor
- Excellent selfcorrective properties
- Hight life expectancy
- Un-poled setup
- Excellent contact-proof connection configurations
They are designed on the basis of a low-loss polypropylene film and show a higher AC-load carrying capacity at high frequencies as well as low power loss/intrinsic heating than the comparable electrolytic capacitors.
Moreover, it is also characterised by:
- Very high volume capacity
- High rated voltage per element
- Very low loss factor (ESR)
- Very high insulation resistor
- Excellent selfcorrective properties
- Hight life expectancy
- Un-poled setup
- Excellent contact-proof connection configurations