Absima USB charging cable 2A/10W for Lithium-Polymer accumulators 2S/7.4V
Max. Output Power 8W/2A
For LiPo or Li-Ion model-construction batteries 2S/7.4V
The perfect outdoor companion for charging via USB-A port
Technical specifications
Product type
Scale model battery charger
Suitable for (No. of LiPo/LiIon/LiFe batteries) (max.)
2
Dim
(L x W x H) 75 x 23 x 12 mm
Operating voltage
5 V via USB
Suitable for (No. of LiPo/LiIon/LiFe batteries) (min.)
1
Weight
20 g
Manufacturer part #
4000003
Max. charging capacity
2 A
Width
23 mm
Height
12 mm
Length
75 mm
Balancer plug-in
XH
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3404495 Absima Scale model battery charger
Description
The USB charging cable has a LED display. During the charging process, the green LED flashes and the red LED flashes continuously. When the battery is fully charged, the green LED is permanently lit and the red LED is off. If only the red LED remains lit, an error has occurred or the charging cable has been protected. The charging speed may vary depending on the power supply. In order to be able to use the full power of the USB charging cable, you need a power supply with min. 10W power (output voltage 2A/5V) which supports fast charge. If you use a power supply with less power, the charging time will be extended accordingly.
This text is machine translated.
Features
Rechargeable battery type LiPo or Li-Ion 2S/7.4V
For rechargeable batteries with a capacity of up to 5000mAh
Charging control via status LEDs red/green
Protection mode against overvoltage, short-circuit or reverse polarity
Plug system XH-balancer plug
Cable length approx. 50 cm
Description
The USB charging cable has a LED display. During the charging process, the green LED flashes and the red LED flashes continuously. When the battery is fully charged, the green LED is permanently lit and the red LED is off. If only the red LED remains lit, an error has occurred or the charging cable has been protected. The charging speed may vary depending on the power supply. In order to be able to use the full power of the USB charging cable, you need a power supply with min. 10W power (output voltage 2A/5V) which supports fast charge. If you use a power supply with less power, the charging time will be extended accordingly.
This text is machine translated.
Features
Rechargeable battery type LiPo or Li-Ion 2S/7.4V
For rechargeable batteries with a capacity of up to 5000mAh
Charging control via status LEDs red/green
Protection mode against overvoltage, short-circuit or reverse polarity