Beha Amprobe 2100-DELTA Two-pole voltage tester Calibrated to (ISO standards) CAT III 1000 V, CAT IV 600 V LCD

Beha-Amprobe completes the voltage tester series 2100 with the 2100-Delta. This robust voltage tester has numerous functions, including current measurement. With safety specifications according to the measurement categories CAT III 1000 V/CAT IV 600 V , it is the ideal product for fault-finding in industrial and commercial environments. You can capture measurements for voltage, current, resistance, continuity and frequency with a single device. The probes can be securely attached to the top of the unit housing when you check power to keep your hand free. With the 2100-Delta you can easily measure currents up to 200 A AC without interrupting the circuit by pushing the open clamp-on ammeter over the conductor. And of course, as with the 2100-Alpha, 2100-Beta and 2100-Gamma, the 2100-Delta is equipped with high-quality components for reliable operation. It has protection class IP 64, fulfills the requirements of the standard EN 61243-3:2014 and is GS tested.

Non-contact detector for breaks in cables through the electrical field
The contactless detector for breaks in cables through the electrical field is ideal for detecting the exact position of breaks in phase conductors.
Hold the voltage tester in such a way that the sensor points toward the line or cable to be tested. The voltage tester indicates the signal strength digitally on the LC display.

Easy troubleshooting in electronics
The pliers with an opening of 13 mm allows a quick inspection of currents and loads during maintenance or troubleshooting of electrical devices.

Protective probe cover with storage of accessories
Keep the 4 mm probe tip extensions and GS38 protective caps here until they are needed. With the tip of the protective probe cover, the safety sockets used in Great Britain can be opened more easily.

This text is machine translated.