Benning 11001243 EV 3-1 Wallbox socket tester

Benning EV 3-1. The wall-box tester and measurement adapter
Benning EV 3-1 enables easy and fast function testing as well as fault finding on wall speakers. In conjunction with a suitable installation tester, the safety and function test of AC charging stations (wall boxes) for electric vehicles can be demonstrated in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110) standards. Compatible for 1 and 3-phase charging stations (EVSE) of the 3 charging mode with type 2 connector. Enables easy functional testing of the Wallbox as well as the contact of the installation tester with the charging station. Simulation of different vehicle statuses: A (not connected), B (connected, not ready), C (charging without ventilation), E (fault, short circuit between CP-PE). Display of the output voltage (L1/L2/L3) and vehicle states (B/C) via colored LEDs. EVSE locking system check from status B (charging cable release is blocked). 4 mm sockets (L1/L2/L3/N/PE) for easy connection with installation tester. 4 mm socket (CP-signal) for analysis of the CP-signal via an oscilloscope/multimeter. Can be used at all common charging stations (wall boxes) with charging socket and fixed-connected charging cable type 2. Thanks to its easy handling, it can also be operated by electrotechnical personnel (EUPs). Measurement category CAT II 300 V

This text is machine translated.