Benning CM 3-PV Clamp meter, Digital multimeter and PSU Digital Data logger CAT IV 1000 V Display (counts): 4.000

Benning CM 3 PV True RMS clamp-on ammeter multimeter for PV systems and applications with 1000 V AC/ 1500 V DC system voltage.
Suitable for photovoltaic, electrical engineering, industry, service, crafts, CAR. 4-digit backlit LCD display (4,000 dots). AC/DC current (0.1 μA - 400 μA (socket), 10 mA - 400 A (pliers)), voltage (1 mV - 1000 V AC/1500 V DC), resistance (0.1 Ω - 40 MΩ), frequency (1 Hz - 5 MHz), capacity (0.1 nF - 100 µF), continuity (buzzer/ LED) and diode test. Precise by real-effective value procedure TRUE RMS. Switch-on current measurement (INRUSH) of motors and lighting systems Low-pass filter (LPF, 1 kHz) for measuring from switched-mode motor drives. Volt sensor for contact-free phase and cable break test (LED/ LCD). Wireless interface (cordless link) for measuring the operating current of the PV string for PV installation tester Benning PV 125 (Art.-No. 10241491, optional).
Measured value (HOLD) and maximum / minimum value memory (MAX/MIN), zero balance (ZERO). Automatic measuring range selection, switch-off, battery low-voltage display. LED measuring point lighting and rubberized grip area. Max. jaw width 30 mm Measurement category CAT IV 1000 V

This text is machine translated.