• All things technology
  • Delivery within Europe
  • Right to Cancel applies
  • Specialist retailer since 1923
Start
Automation & PneumaticsAutomationIndustrial SensorsSafety ComponentsSafety Relays

Crossbar switch IOA-PSR-PS22-1NO-1NC-24DC Phoenix Contact (W x H x D) 10 x 75 x 112 mm 1 pc(s)

A bright yellow industrial device with a serrated top edge and an orange clip on the side, featuring a label with technical details.
Image similar
Product type
Crossbar switch
Connector
Socket
Type
IOA-PSR-PS22-1NO-1NC-24DC
Switching voltage (max.)
230 V DC/AC
30 V DC
IP rating
IP20
Datasheet (PDF)
EAN:
Part number:
Item no:
Unavailable
Sales and shipping:
Conrad ElectronicTerms & Conditions
Report legal concerns

Technical specifications

  • Product family: PSRmini
  • Connection type: Connects to VIP socket module
  • Width: 10 mm
  • Height: 75 mm
  • Depth: 112 mm
  • Material housing PA 6.6
  • Ambient conditions: Environmental conditions
  • Protection class: IP20
  • Ambient temperature (operation): -40 °C ... 70 °C (observe De-rating)
  • Ambient temperature (storage/transport): -40 °C ... 85 °C
  • Mounting type: Plug-in assembly
  • Insulation properties: Insulation properties
  • Over voltage category III
  • Pollution level: 2
  • Vibration (operation): 10 Hz ... 150 Hz, Amplitude 0.15 mm, 2g
  • Mounting position: Vertical or horizontal
  • ATEX
  • IECEx: IECEx
  • UL, USA / Canada: UL, USA / Canada
  • Maximum power loss at rated conditions: 1.86 W (at UB = 30  VDC, UBD = 30  VDC, IL = 9 A²)
  • CE CE
  • Certificate E360692
  • Connection technology: Connection technology
  • Note for application: Only for industrial use
  • Wire connection: Conductor connection
  • Switching frequency 0.1 Hz
  • Mounting instructions: See derating curve
  • Operating height: ≤ 2000 m (over NN)
  • Max. ass. Humidity (operating): 75% (average, 85% occasional, no condensation)
  • Shock: 15g (Contact reactions are possible under continuous shock load)
  • Protection circuit: Overvoltage protection | 35 V suppressor diode (pins 05/06)33 V suppressor diode (pins 04/03)35 V suppressor diode (pins 02/03);Reverse polarity protection for rated control circuit supply voltage and diagnostic supply voltage
  • 2 x LED Bi-Colour (green, red)
  • Switching voltage: Min. 19.2 V DC; max. 30 V DC
  • Application: Safe shutdown;High Demand;Low Demand;Ex
  • Supply: Supply
  • Colour (housing): Yellow (RAL 1018)
  • Min. Switch-on current 1 mA; max. 100 mA
  • Description of the output: Safety-related NC contacts
  • Contact version 1 feedback current path
  • Continuous current limit 100 mA
  • Rated insulation voltage 250 V AC
  • RATED CONTROL CIRCUIT SUPPLY VOLTAGE US: 24 VDC -20 % / +25 %
  • Rated control feed current IS: Typ. 25 mA
  • Safety specifications: Safety specifications
  • Mechanical life: 10x 106 switching cycles
  • Typical fall-back time: 30 ms (when controlled via pins 05/06)
  • Contact material AgCuNi, + Au
  • SWITCHING CAPACITY 3 A (24 V DC 13);3 A (230 V AC 15)
  • Output fuse 150 mA quick-blow
  • CSA, USA/Canada: CSA, USA/Canada
  • Relay type: Electromechanical relay with forced contacts according to IEC/EN 61810-3
  • Times: Times
  • Type. US reaction time: 150 ms (when driven by pins 05/06)
  • Readiness time 500 ms
  • Rating type 100 % ED
  • Rated surge voltage / insulation: Basic insulation 4 kV between all current paths and housing; safe isolation, reinforced insulation 6 kV from control circuit (05/06) and diagnostic circuit (03/04/02) to enable current path (15/19)
  • Filter time: Max. 3 ms (on pins 05/06 in the case of voltage dips in US);max. 3 ms (on pins 05/06 | low test pulse width);≥ 50 ms (on pins 05/06 | low test pulse rate);max. 17 ms (on pins 05/06 | high test pulse width);≥ 600 ms (on pins 05/06 | high test pulse width)
  • Number of outputs: 1 (undelayed)
  • Switching capacity: Min. 20 mW
  • Quadr. Total current: 9 A2 (observe derating)
  • Safety specifications: EN ISO 13849: Safety specifications: EN ISO 13849
  • Performance Level (PL): E (3 A DC13 | 3 A AC15 | 8760 cycles/year)
  • Safety Integrity Level (SIL) 3
  • Safety specifications  : EN IEC 62061: Safety specifications: EN IEC 62061
  • Protection class Installation location minimum: IP54
  • Max. ass. Humidity (storage/transport): 75% (average, 85% occasional, no condensation)
  • plug connection: yes
  • 1 and 2 channel control
  • Power consumption in US: Typical 0.77 W
  • Diagnostic Supply Voltage UD: 24 Vdc -20 % / +25 % (on pin 04)
  • Input current at UD: 7 mA (on pins 04/03 at UD | + 100 mA depending on load at pin 02)
  • Switch-on current at UD: Typ. 200 mA (Δt < 1 ms | on pins 04/03 at UD)
  • Relay: Enable current path: Relay: Enable current path
  • Relay: Feedback current path: Relay: Feedback current path
  • Stop category: 0
  • Technical data: EN 50156-2: Technical data: EN 50156-2
  • Security specifications : IEC 61508 - High-Demand: Security specifications: IEC 61508 - High-Demand
  • Technical data: IEC 61508 - Low-Demand: Security specifications: IEC 61508 - Low-Demand
Product type

Crossbar switch

Type

IOA-PSR-PS22-1NO-1NC-24DC

Connector

Socket

Switching voltage (max.)

230 V DC/AC

30 V DC

IP20

Depth

112 mm

Width

10 mm

Height

75 mm

Dim

(W x H x D) 10 x 75 x 112 mm

Content

1 pc(s)

UKCA

yes

Documents & Downloads

Datasheet

Datasheet 3579333 Crossbar switch IOA-PSR-PS22-1NO-1NC-24DC Phoenix Contact (W x H x D) 10 x 75 x 112 mm 1 pc(s)

User & Safety Instructions

User & Safety Instructions 3579333 Crossbar switch IOA-PSR-PS22-1NO-1NC-24DC Phoenix Contact (W x H x D) 10 x 75 x 112 mm 1 pc(s)

Description

Plug-in SIL interface relay as input/output accessory for VIP socket module, SIL 3 high and low demand applications, safe-state-off, couples digital output signals to the I/O, a release current path, a feedback current path, test pulse filter

This text is machine translated.