Name: Digitus DN-14001-1 Compatible with: CAT 3, CAT 5, CAT 6, CAT 7a
Brand: Digitus
SKU: 2335602

'Three LAN test devices for network cable testing on a white background. Checking cable connections and PoE availability.'

Three network cable testers from different perspectives. Showing connections and status LEDs for cable diagnostics.

Cable tester set with LAN and PoE testers in an open protective case, including adapters and cable accessories. Ideal for network technology.

'Network testing device kit in an open black case, includes LAN tester, PoE tester and cable adapter in a pouch.'

1/4

Unavailable

37 Piece(s)

Show alternatives

Sales and shipping:

Conrad ElectronicTerms & Conditions

Report legal concerns

Highlights & Details

Digitus Network Tester & Cable Tester - PoE-Tester - Scan Automatic - RJ45 RJ11 ISDN BNC - LAN network cable Coax cable

With the cable tester you can easily check whether you have performed your network cabling correctly and immediately recognize if you have not placed an Ethernet cable correctly
In addition to the pure continuity test, it is also possible to test whether two wires have been swapped or cause a short circuit - thanks to the remote unit also with already installed laying cables
Depending on the situation, you can switch between the manual test and an automatic loop test that systematically tests one wire at a time and then starts again from the beginning
The PoE tester shows you whether a PoE signal is present at a port or a network socket and which PoE mode it is - the PoE Finder is compatible with the PoE standards AF & at
The test device is suitable for all network cables from Cat 3 & coax BNC via Cat 5 & Cat 6 to Cat 7A as well as UAE, TAE & telephone cable and helps, for example, with the cable installation for your DSL connection

Technical specifications

Product dimensions (main unit): 80 x 55 x 25 mm (H x W x D)
Product dimensions (remote): 80 x 25 x 25 mm (H x W x D)
Product dimensions (hard case): 46 x 180 x 120 mm (H x W x D)

Product type: Network tester

Compatible with: CAT 3
CAT 5
CAT 6
CAT 7a

Factory colour: Grey

Height: 50 mm

Length: 250 cm

Width: 100 mm

Weight: 550 g

UKCA: yes

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 2335602 Digitus DN-14001-1 Compatible with: CAT 3, CAT 5, CAT 6, CAT 7a

Description

The LAN tester enables an easy identification of the correct pin assignment of 10Base-T, 10Base-2, RJ45/TM11 modular cables as well as 258A, TIA-568A/568B and Token Ring cables, etc., by comparing the outgoing cable end with the corresponding receiving cable end. With the remote tester you can test cables that are installed in a different location, for example in wall distributors or patch fields. Easy identification of the cabling is guaranteed.

This text is machine translated.