DL2-BH98S-pm Eltako Motion/light sensor Light controller Flush mount Max. range (open field) 12 m

DALI-2 motion brightness sensor standard. Application Controller and Instances. Protection IP 20. DALI-2 certified. The DL2-BH98 is connected directly to and supplied by the DALI bus. A DALI bus power supply is assumed, no further power supply is required. Maximum power consumption: 3.5mA. The connection to the DALI terminals can be done without observing the polarity. The terminals are suitable for a conductor cross-section from 0.5mm2 to 1.5mm2. The DALI cables can be fitted with standard low voltage installation material. No special cables are required. Fixing of the mounting ring directly to the electrical installation box, the housing is simply attached to the mounting ring in connection, the recessed sensor head finds place in the electrical installation box. Alignment on the desired detection range by 40° vertical tilt and 360° Axial rotation. Application controller and instances can be configured via Dali-Cockpit. In principle, a distinction is made between an application controller and the DALI-2 instances. The application controller leads to direct DALI control commands that are executed directly by the DALI drivers. The DALI-2 instances generate event messages that are interpreted and processed by higher-level control units. 4 operating modes - motion-controlled - Motion-controlled with constant light control. - Constant light control. - Light control (4 thresholds). Operating behavior can be set via scenes and external DALI commands. Corridor function - second light value for dimming off before switching off. Optional use as active DALI light control unit or as a sensor unit for integration in building control systems. Bi-directional integration via the FD2G14 in the series 14. Easy configuration via the DALI bus using the PC software tool DALI-Cockpit. Several sensors are possible in a DALI circuit. Automatic synchronization of several sensors with the same effective range. Dimensions 98x47mm. Installation depth 30mm. Colour: Matt polar white (similar to RAL9010). Motion detector: Detection range: 12m. Installation height 8m. Zones: 92. Horizontal ±51°. Vertical: ±46°. Light sensor: Range: 0-2047lux (11bit), resolution: 1lux. Event: 0-2047lux (10bit), Resolution: 2lux.

This text is machine translated.