Gossen Metrawatt Z525F METRALINE PRO-TYP EM I Test adapter 1 pc(s)
EAN:
Part number:
Item no:
Number
Total (€ 695.00 / piece)
€ 695.00
incl. VAT
14-day return policy included
Highlights & Details
1- and 3-phase test adapter for testing E-charging points METRALINE PRO-TYPE EM I
- 1- and 3-phase test adapter for testing the effectiveness of protective measures
- At E-charging points with the Profitest master, simulation of
- Fictively connected electric vehicles as well as simulation of the
- Current carrying capacity of charging sets according to IEC 61851-1
- Vehicle simulation (CP)
- Vehicle statuses A, B, C and E are set using the rotary switch
- Cable simulation (PP)
- The different encodings for charging cable with 13 A, 20 A,
- 32 A and 63 A and "no cable connected"
- Can be simulated using rotary switches
- Error simulation
- Simulation of a short circuit between CP and PE
- Via rotary switch
- Display of the phase voltages via LEDs
- Depending on the E-charging station, one or three phases can be active
- Testing of E-charging stations with firmly attached charging cable
- By extended CP test pin
- CP socket for evaluating the PWM signal
- METRALINE PRO-TYPE EM I:
- The measuring cables of the Profitest master are connected via 4 mm safety sockets (L1, L2, L3, N, PE).
- This text is machine translated.
Technical specifications
- Product type
Test adapter
- Compatible with
Gossen Metrawatt
- Weight
750 g
- Reading category
CAT III 300 V
- Compatible with
GMC-I Profitest
- Width
105 mm
- Height
53 mm
- Length
210 mm
- Type
METRALINE PRO-TYP EM I
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2240020 Gossen Metrawatt Z525F METRALINE PRO-TYP EM I Test adapter 1 pc(s)
Description
Features
- Functions:
- Vehicle simulation (CP)
- according to IEC 61851, states A, B, C and E can be simulated. The different vehicle states are
- set via the rotary switch.
- Status A no vehicle connected
- Status B Vehicle connected, But not ready for charging
- State C Vehicle connected and ready for charging,
- ventilation of charging area not required
- State E Fault - short circuit CP - PE via internal diode
- cable simulation (PP)
- The different encodings for charging cables with 13 A, 20 A, 32 A and 63 A can be simulated. It
- is also possible to simulate the "no cable" state.
- The various charging cables are simulated by switching different resistances between PP and PE using
- the rotary switch. According to IEC 61851, the following values are possible:
- No cable 0 Ω
- 13 A cable 1.5 kΩ
- 20 A cable 680 Ω
- 32 A cable 220 Ω
- 63 A cable 100 Ω
Scope of delivery
- 1x test adapter PER TYPE EM I
- 1x user manual
What kind of Tester Specialty Accessories are you looking for?
More interesting products
(*All information is plus legal VAT)
Conrad Electronic
€ 339.00*
-38%
€ 11.99
€ 7.49*
€ 31.99*
