Image similar
Hobbywing Hobbywing Regler FlyFun 6A Model aircraft brushless motor controller Load (Amp max.): 6 A
EAN:
Part number:
Item no:
Technical specifications
- Application area: Aircraft
- Product type
Model aircraft brushless motor controller
- Permanent current
6 A
- Max. operating voltage
7.4 V
- Dim
(L x W x H) 32 x 12 x 4.5 mm
- Load (max.)
6 A
- Weight
6 g
- Operating voltage
7.4 V (max)
- BEC data
0.8 A
- No. of LiPo cells
2
- No. of NiCd/NiMH batteries
6-May
- Width
12 mm
- Height
4.5 mm
- Length
32 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2279200 Hobbywing Hobbywing Regler FlyFun 6A Model aircraft brushless motor controller Load (Amp max.): 6 A
Description
Hobbywing controller FlyFun 6A
Brushless controller
Ideal for 150 g 3D-area flyers and 300 g sport-area flyers
Durable with 6 ampere load capacity
Integrated BEC
Can be used with 2S LiPo and 5-6 cells NiMH
The FlyFun 6A by Hobbywing is a brushless controller for 3D surface flyers with a weight of 150 g and 300 g heavy sport surface flyers. It can be permanently loaded with up to 6 A and can withstand short-term peak currents of up to 8 A. It is suitable for operation with 2S LiPo batteries as well as for use with NiMH batteries, which have five to six cells. For the power supply of the receiver, the controller is equipped with a BEC, which supplies up to 0.8 A at a voltage of 5 V.
Features in the overview
Safety device at start-up: No matter where the throttle lever is placed, the motor will not turn off when the battery is connected. Gas calibration function: The gas path can be calibrated to be 100% compatible with the most diverse transmitters. Different programming options with joystick of the remote control or the LED Program Card. The timing can be changed to be compatible with the most diverse brushless motors. Complete protection mechanisms such as low-voltage cut-off, overheating protection and gas signal loss protection.
This text is machine translated.
Brushless controller
Ideal for 150 g 3D-area flyers and 300 g sport-area flyers
Durable with 6 ampere load capacity
Integrated BEC
Can be used with 2S LiPo and 5-6 cells NiMH
The FlyFun 6A by Hobbywing is a brushless controller for 3D surface flyers with a weight of 150 g and 300 g heavy sport surface flyers. It can be permanently loaded with up to 6 A and can withstand short-term peak currents of up to 8 A. It is suitable for operation with 2S LiPo batteries as well as for use with NiMH batteries, which have five to six cells. For the power supply of the receiver, the controller is equipped with a BEC, which supplies up to 0.8 A at a voltage of 5 V.
Features in the overview
Safety device at start-up: No matter where the throttle lever is placed, the motor will not turn off when the battery is connected. Gas calibration function: The gas path can be calibrated to be 100% compatible with the most diverse transmitters. Different programming options with joystick of the remote control or the LED Program Card. The timing can be changed to be compatible with the most diverse brushless motors. Complete protection mechanisms such as low-voltage cut-off, overheating protection and gas signal loss protection.
This text is machine translated.