Simple automations directly on the control without software and/or PC
Operation with limit switch or via power consumption
Left/right rotation and speed control directly at the housing
Possibility for the attachment of external switch/joysticks
Different operating modes, Tip operation as well as continuous operation
Different acceleration ramps can be set
Supply via 24 V/2.5 A
Technical specifications
Power supply: 24V, ±2 V
Motor types: DC motor
Continuous motor current: Max. 2.5 A
Power Output: Max. 60 W
Cable length: 3 m max.
Cable cross-sections: 0.34mm² up. 1.5 mm².
IP30 protection
.
Product type
Motor controller
Length
126 mm
Width
27 mm
Manufacturer part #
D3
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1718140 igus Motor controller D3 dryve
Description
Ready to use immediately Voltage source and engine: You can right away. No annoying software installation or complex wiring of various additional switches and sensors.
Simple control Via the intuitive rotary elements, you can without any prior knowledge the speed and force limitation of the connected motor. A traversing motion may be caused by the two buttons on the front of the dryve D3 can be started.
This text is machine translated.
Description
Ready to use immediately Voltage source and engine: You can right away. No annoying software installation or complex wiring of various additional switches and sensors.
Simple control Via the intuitive rotary elements, you can without any prior knowledge the speed and force limitation of the connected motor. A traversing motion may be caused by the two buttons on the front of the dryve D3 can be started.