Ixxat 1.01.0331.42000 Canbridge NT 420 CAN bridge CAN bus 24 V DC 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 959.00 / piece)
€ 959.00
incl. VAT
Only 3 Piece(s) available
Technical specifications
- The CAN baud rates standard CAN: 5 to 1000 kBaud
- CAN-Bus Termination: none
- CAN Transceiver: Texas Instruments SN65HVD SN65HVD 251 P 251 PTexas Instruments
- Max. Number of participants: 120
- Galvanic insulation 1 kV for 1 sec.
- Protection class: IP20
- Dimensions is 114.5 x 99 x 22.5mm
- Weight approx. 150 g certification CE, FCC
- Product type
CAN bridge
- Interfaces
CAN bus
- Type
Canbridge NT 420
- Operating voltage
24 V DC
- Max. operating temperature
+ 85 °C
- Min. operating temperature
- 40 °C
- Operating temperature
- 40 up to + 85 °C
- Dim
(W x H) 114 mm x 99 mm
- Max. current consumption
110 mA
- Height
99 mm
- Width
114 mm
- Manufacturer part #
1.01.0331.42000
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 1616324 Ixxat 1.01.0331.42000 Canbridge NT 420 CAN bridge CAN bus 24 V DC 1 pc(s)
User & Safety Instructions
User & Safety Instructions 1616324 Ixxat 1.01.0331.42000 Canbridge NT 420 CAN bridge CAN bus 24 V DC 1 pc(s)
Description
The CANbridge NT is available as CANbridge NT 420 with four CAN channels, two of which can be switched between CAN and CAN-FD.
The devices allow easy coupling of networks, even those with different bit rates or frame formats (11/29-bit identifiers). The bridges/routers have a powerful microcontroller that can perform message filtering, ID conversion and data multiplexing (e.g. for CAN-FD to CAN message conversion) even at bursts and high data rates without message loss.
Features
· four CAN channels, two channels can be switched between CAN and CAN-FD
· Easy coupling of CAN networks
- CAN WITH CAN FD
- different bit rates
- different frame formats (11/29-bit identifier), including message routing via mapping table
- Message filtering
- ID implementation
· Data multiplexing (e.g. for CAN-FD to CAN message conversion) even at bursts and high data rates without message loss
· Easy configuration with a Windows-based tool
Benefits
Easy coupling of CAN and CAN-FD systems and devices
Cost savings through simple wiring
Increase system expansion and use of tree/star topologies
Increased system reliability
Protection of the segments by galvanic insulation
Functional principle
In contrast to a CAN repeater that only translates the electrical signals, the bridge/router receives the messages completely and then sends them to the other network (store-forward principle), taking into account filter, conversion, mapping and multiplex rules. With the help of mapping tables, the message exchange between all four networks is possible.
Filter and conversion rules can be used to filter or modify CAN or CAN-FD messages. This can reduce the bus load on each network, since only messages that are of interest to the other network are transmitted. Data multiplexing enables the mapping of CAN-FD data to several standard CAN messages, for example.
Configuration
The configuration of the CANbridge NT can be done comfortably via USB using the Windows-based configuration tool supplied. The tool makes it very easy to configure filter, mapping, multiplexer or translation rules without any programming knowledge.
This text is machine translated.
The devices allow easy coupling of networks, even those with different bit rates or frame formats (11/29-bit identifiers). The bridges/routers have a powerful microcontroller that can perform message filtering, ID conversion and data multiplexing (e.g. for CAN-FD to CAN message conversion) even at bursts and high data rates without message loss.
Features
· four CAN channels, two channels can be switched between CAN and CAN-FD
· Easy coupling of CAN networks
- CAN WITH CAN FD
- different bit rates
- different frame formats (11/29-bit identifier), including message routing via mapping table
- Message filtering
- ID implementation
· Data multiplexing (e.g. for CAN-FD to CAN message conversion) even at bursts and high data rates without message loss
· Easy configuration with a Windows-based tool
Benefits
Easy coupling of CAN and CAN-FD systems and devices
Cost savings through simple wiring
Increase system expansion and use of tree/star topologies
Increased system reliability
Protection of the segments by galvanic insulation
Functional principle
In contrast to a CAN repeater that only translates the electrical signals, the bridge/router receives the messages completely and then sends them to the other network (store-forward principle), taking into account filter, conversion, mapping and multiplex rules. With the help of mapping tables, the message exchange between all four networks is possible.
Filter and conversion rules can be used to filter or modify CAN or CAN-FD messages. This can reduce the bus load on each network, since only messages that are of interest to the other network are transmitted. Data multiplexing enables the mapping of CAN-FD data to several standard CAN messages, for example.
Configuration
The configuration of the CANbridge NT can be done comfortably via USB using the Windows-based configuration tool supplied. The tool makes it very easy to configure filter, mapping, multiplexer or translation rules without any programming knowledge.
This text is machine translated.
Scope of delivery
- Can Bridge NT 200
- CD with CAN Gateway Configurator
- Manual
- Mini USB cable
More interesting products
(*All information is plus legal VAT)
Conrad Electronic
€ 585.00*
€ 745.00*
Conrad Electronic
€ 3.29*
TRU COMPONENTS TC-KW-413 Serial converter USB, RS-232 No. of inputs: 1 x No. of outputs: 1 x 1 pc(s)
Conrad Electronic
€ 14.99*
TRU COMPONENTS TC-KW-415 Serial converter USB, RS-232 No. of inputs: 1 x No. of outputs: 1 x 1 pc(s)
Conrad Electronic
€ 17.99*
€ 53.99*
TRU COMPONENTS TC-KW-429 Serial converter USB, RS-485 No. of inputs: 1 x No. of outputs: 1 x 1 pc(s)
Conrad Electronic
€ 22.99*
