1/3
PCE Instruments PCE-MO 2001 Ohmmeter, Continuity tester
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 429.00 / piece)
€ 429.00
incl. VAT
Only 2 Piece(s) available
Highlights & Details
Milliohm meter PCE-MO 2001
- Enables resistance measurements
- Measures binding energy
- Enables continuity testing
- Used to check read contacts
- Four-wire system
- Protection against excess temperature and over-voltage
- LED display when measured value is exceeded
- Safety: IEC-1
Technical specifications
- Technical specification of milliohm meter PCE-MO 2001 Measuring ranges 0 ... 200 mΩ in steps of: 100 μΩ/ 0 ... 2000 mΩ: 1 mΩ/ 0 ... 20 Ω: 10 mΩ/ 0 ... 200 Ω: 100 mΩ/ 0 ... 2000 Ω: 1 Ω Accuracy ±0.75 % v. Measured value +4 digits (above 20 Ω) ±0.75 % of measured value +2 digits (above 20 Ω) Resolution 0.1/ 1/ 10 mΩ 0.1/ 1 Ω Test current 1 mA (2000/200 Ω range) 10 mA (20/2 Ω ranges) 100 mA (200 mΩ range) Accuracy ±0.1 % Measurement rate approx. 0.4 s. Zero setting manually, a "1" is displayed via the rotary wheel (± 50 counts) Internal power supply 230 V AC, 50/60 Hz Dimensions of device 250 x 180 x 200 mm Cable length 50 cm (between plug and pliers)Weight 680 g STANDARDIZATION IEC-1010-1 CAT II.
- Product type
Ohmmeter
- Reading type
Insulation resistance
Resistance
Resistance
Manufacturer's standards (no certificate)
- Dim
(L x W x H) 200 x 250 x 180 mm
- Weight
680 g
- Display type
Digital (LCD)
- Reading category
CAT II
- Width
250 mm
- Height
180 mm
- Length
200 mm
Documents & Downloads
Datasheet
Datasheet 2452518 PCE Instruments PCE-MO 2001 Ohmmeter, Continuity tester
User & Safety Instructions
User & Safety Instructions 2452518 PCE Instruments PCE-MO 2001 Ohmmeter, Continuity tester
Description
Milliohm meter PCE-MO 2001 Milliohm meter in waterproof case / Measuring ranges: 100 μΩ ... 2000 Ω this milliohm meter in a splash-proof housing enables resistance measurements from 100 μΩ to 2000 Ω. The measured value display on the milliohm meter PCE-MO 2001 is done via a 3½-digit, very well readable, LCD display. To determine the measured value, a constant current is applied to the object to be measured and the voltage drop is measured over the object to be measured. The milliohm meter enables resistance measurements to be carried out on coils, generators, transformers, circuits such as parallel and auxiliary circuits and switches and relays. The milliohm meter also measures binding energy in mines, airplanes, track systems, ships and electrical installations in household and industry. Continuity tests on ring systems (ring buses) in the household and industry are no problem for the milliohm meter. This makes it possible, for example, to test compression elements of overhead lines or to carry out test and maintenance work on control cabinets. The milliohm meter can also be used to test the function of components such as fuses, connection elements, contacts, etc. The robust rubber housing makes the multi-ohm meter PCE-MO 2001 a reliable companion in the rough everyday life of plant builders and electrical installers. The milliohm meter is always delivered factory calibrated. As an optional accessory, the measuring device can also be calibrated in laboratories and equipped with a certificate according to ISO.
This text is machine translated.
This text is machine translated.
Scope of delivery
- Scope of delivery of the milliohm meter PCE-MO 2001
- 1 x Milliohm Meter PCE-MO 2001
- 1 x set of test leads
- 1 x power cable
- 1x user manual
