Image similar
Phoenix Contact CLOUD CLIENT 1101T-TX/TX LAN router 10 / 100 MBit/s
EAN:
Part number:
Item no:
Datasheet (PDF)
Technical specifications
- Security functions:
- 1:1 Network Address Translation (NAT) in VPN: Is supported
- Number of VPN tunnels: 1
- Authentication: X.509v3
- Data integrity: SHA-1, SHA-2
- Internet Protocol Security (IPsec) mode: ESP tunnel
- AES 256 encryption methods
- Electrical isolation: VCC // FE // Ethernet
- Maximum power loss at rated conditions 4.8 W.
- Network type: Ethernet
- Supply voltage range: 10 V DC ... 30 V DC (SELV, via Push-in-clamp plug-in)
- Typical current consumption < 200 mA (24 V DC)
- Power consumption maximum 500 mA
- Management: Web-based management
- Description of the input: Digital input
- Number of inputs: 1
- Input signal voltage: 10 V DC ... 30 V DC
- Switching level "1" signal: 10 V DC ... 30 V DC
- Designation Output: Digital output
- Number of outputs: 1
- Output signal voltage: 10 V DC ... 30 V DC (depending on the operating voltage)
- Output signal current: ≤ 50 mA (not short-circuit-proof)
- Single-conductor/clamping point rigid: 0.14 mm² ... 1.5 mm².
- Single-conductor/flexible clamping point: 0.14 mm² ... 1.5 mm².
- Conductor cross-section flexible [AWG]: 26 ... 16
- Ethernet signal
- Data: Ethernet-interface, 10/100Base-T(X) according to IEEE 802.3
- Serial transfer rate 10/100 MBit/s, auto-negotiation
- Connection type: RJ45-socket, shielded
- Number of channels: 2 (LAN + WAN, SELV)
- Transfer length 100 m (twisted-pair, shielded)
- SUPPORTED PROTOCOLS: TCP/IP, UDP/IP, FTP, HTTP(S)
- AUXILIARY PROTOCOLS: ARP, DHCP, PING (ICMP)
- Product type
LAN router
- Transfer rate
10 / 100 MBit/s
- 10/100 Mbps ports
1 x
- 10/100 Mbps WAN ports
1 x
- Interfaces
RJ45
IP20
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3566869 Phoenix Contact CLOUD CLIENT 1101T-TX/TX LAN router 10 / 100 MBit/s
User & Safety Instructions
User & Safety Instructions 3566869 Phoenix Contact CLOUD CLIENT 1101T-TX/TX LAN router 10 / 100 MBit/s
Description
Industrial VPN gateway to mGuard Secure Cloud, IPsec communication over operator network, 1 WAN port, 1 LAN port, routing function, 1 digital input, 1 digital output.
The CLOUD CLIENT TX/TX positions itself as low-cost field devices for safe remote maintenance scenarios via the operator network. The devices are optimized for use with the mGuard Secure Cloud. All CLOUD CLIENT devices therefore support Virtual Private Networks (VPNs) by default. A range of functions optimized for the mGuard Secure Cloud allows the devices in the field to be put into operation quickly.
This text is machine translated.
The CLOUD CLIENT TX/TX positions itself as low-cost field devices for safe remote maintenance scenarios via the operator network. The devices are optimized for use with the mGuard Secure Cloud. All CLOUD CLIENT devices therefore support Virtual Private Networks (VPNs) by default. A range of functions optimized for the mGuard Secure Cloud allows the devices in the field to be put into operation quickly.
This text is machine translated.
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
![Renkforce RJ45 Networks Adapter CAT 5e [1x RJ45 socket - 1x RJ45 socket] White](https://asset.conrad.com/media10/isa/160267/c1/-/en/1381787_LB_00_FB/renkforce-rj45-networks-adapter-cat-5e-1x-rj45-socket-1x-rj45-socket-white.jpg?x=130&y=130&format=webp&ex=130&ey=130&align=center)
€ 3.49*