Name: RAISE3D Left Hotend Assembly Suitable for (3D printer): Raise3D E2 Left Hotend Assembly [S]3.01.1.018.023A01
Brand: RAISE3D
SKU: 2543942
Availability: InStock

Printhead for a 3D printer with metal housing, nozzle opening and cables for connection to the power and control unit.

Fast track dispatch on Tue 27 Oct

9 Piece(s)

Sales and shipping:

Conrad ElectronicTerms & Conditions

Number

Piece(s)

Total (€ 124.99 / piece)

€ 124.99

incl. VAT

Only 9 Piece(s) available

14-day return policy included

Report legal concerns

Highlights & Details

RAISE3D E2 Left Hot End Assembly

Compatible with RAISE3D E2 printerSimple to installAnti-leak and anti-blockage designHeat resistant bis300°C.Nozzle can be replaced (V3 brass nozzle 0.4mm and V3 hardened nozzle)

Technical specifications

Type: Left Hotend Assembly

Product type: Hotend

Suitable for: Raise3D E2

Nozzle Ø: 0.4 mm

Width: 130 mm

Height: 110 mm

Depth: 20 mm

Suitable for filament Ø: 1.75 mm

Type: Left Hotend

Printing technology: Fused deposition modeling (FDM)

Operating voltage: 24 V

Weight: 20 g

UKCA: yes

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 2543942 RAISE3D Left Hotend Assembly Suitable for (3D printer): Raise3D E2 Left Hotend Assembly [S]3.01.1.018.023A01

Description

Replacement hot-end incl. Heating cartridge and temperature sensor (thermistor), suitable for the 3D printer RAISE3D E2, for V3 Brass Nozzle 0.4 mm and V3 Hardened Nozzle. The heater block is marked for the left extruder.Applicability and Compatibility: The RAISE3D E2 Hot End Assembly is compatible with the RAISE3D E2 printer. The thermocouple interface is an easy-to-install terminal that can be plugged directly into the extruder control board.Anti-leak and anti-blockage designThe nozzle of the extruder is seamlessly connected to the neck tube to prevent leaking or clogging of filaments. Heat resistanceThe maximum working temperature is 300°C.Nozzle can be replacedV3 brass nozzle 0.4mm and V3 hardened nozzle

This text is machine translated.

Scope of delivery

Heater block made of aluminum
Immersion heater (voltage 24V, power 25-40W)
0.4 mm brass nozzle
17.7 mm hose
Thermo element

Hints

Installation tips: When disassembling and reassembling the hot end, turn off the printer. The temperature of the hot end can be very high, therefore please wear the provided heat-insulating gloves and use needle-nose pliers for all procedures. Be sure to check all wiring and power supply values carefully. It is recommended that the nozzle is not tampered with until the power supply has been switched off to avoid the possibility of a short circuit and fire. Please refer to the Hot End Assembly Replacement Guide to learn how to disassemble and assemble the hot end.