ruthex Threaded insert RX-M6x12.7 GE-M6x127-002

M6 THREADED INSERTS FOR YOUR 3D PRINTING PARTS: The rutex threaded nuts can be used later on in parts of 3D printers such as Anycubic, Prusa by means of heat or ultrasound. With the help of heat through a soldering iron or ultrasound the press-in nuts are simply embedded in a sack or through hole

SOLID grip FOR SIMPLE APPLICATION: Thanks to the geometry of the threaded sleeve, it holds firmly in the pressure part. The opposite spiral-shaped knurled nuts provide for a balanced high tightening and loosening torque, as well as a high tightening force. Through the guide the insertion is made much easier

STABLE and LONG-LASTING SCREW-IN threads: The inserts with internal thread are made of high-quality brass, WAS ensures optimum corrosion resistance and heat conductivity. Thus each press-in nut can be used for a long term and is easy to use. The screw-in thread can also be reused by carefully removing it from the pressure part, if this is possibly not needed anymore

SUITABLE FOR A VARIETY OF PLASTICS: The inserts are designed for all thermoplastic plastics. The knurled nuts also hold PLA, PETG, ABS, PPS, PP and many more. As soon as the plastic of the part around the brass sleeve cools down again and hardens, the internal threaded sleeve is firmly anchored

PRACTICAL THREAD-INSERT set: The runhex thread-insert set RX-M6x12.7 comprises 25 press-in nuts with M6 inner thread and a length of 12.7 mm. These threaded sleeves can be used through ultrasound and heat embedding

This text is machine translated.