Name: SpeaKa Professional SP-USBE-830 7+2 ports KVM extender PC-controlled Black
Brand: SpeaKa Professional
SKU: 3368240
Availability: InStock

Two black USB 3.2 devices over CAT extender with multiple ports, marked with 'HDBaseT'.

Two black devices for USB 3.2 extension over CAT cables. One shows USB ports, the other Ethernet ports.

'USB 3.2 over CAT Extender': Two black modules for extending USB signals over CAT cables. Front side shows connectors and status LEDs.

'USB 3.2 over CAT Extender' with two USB ports, status indicators and connection ports. Improves USB connections over long distances.

Front and rear view of an electronic device with USB ports, LED indicators, and Ethernet connection. Power supply: DC 24V.

Device with HDMI ports and USB ports, labelled as 'USB Devices' and 'Host', with indicators for connections and power supply.

USB 3.1 Extender Set, consisting of two black modules, power supply and accessories, for extending USB signals over CAT cables.

'Setup' with a computer, monitor, keyboard and mouse on a table. The screen displays a diagram with rising and falling curves.

1/8

Fast track dispatch on Fri 23 Oct

2 Piece(s) (Only while stocks last)

Sales and shipping:

Conrad ElectronicTerms & Conditions

Number

Piece(s)

Total (€ 255.00 / piece)

€ 255.00

incl. VAT

Only 2 Piece(s) available

14-day return policy included

Report legal concerns

Highlights & Details

SPEAKA Professional SP-USBE-830 USB 3.0 Extender, 100 metres with two USB-B/USB-C® inputs, black

Can extend USB 3.2 Gen 1 5Gbps signal to a distance of up to 100m/328ft via a single CAT6a cable
Transmitter: One USB-C® and one USB-B input port
Receiver: One USB-C® and three USB-A ports
Bi-directional 24V PoC (Power over Cable) function for supplying power to the transmitter or receiver.
Ideal for long-range USB signal transmission between USB sources and devices, e.g. webcams, PTZ cameras, keyboards, mouse devices, USB microphones, flash sticks, printers, scanners, and touch panel displays.

Technical specifications

Product type: KVM extender

Supported monitors: 2

No. of inputs: 2 x

Interfaces (input): USB C® (USB 3.2 1st gen)

No. of outputs: 7 x

Interfaces (output): USB C® (USB 3.2 1st gen)

Switch function: Key

Power supply (LOV): mains-powered

Distributor/switch features: PC-controlled

Factory colour: Black

Weight: 313 g

Width: 140 mm

Height: 23 mm

Depth: 75 mm

Dim: (W x H x D) 140 x 23 x 75 mm

Port: 7+2 ports

Plastic free packaging: Plastic-free packaging

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 3368240 SpeaKa Professional SP-USBE-830 7+2 ports KVM extender PC-controlled Black

Description

Range extension for the computer peripherals
If USB source and destination devices must communicate with each other over long distances, the SpeaKa Professional SP-USB 830 USB 3.0 Extender is the ideal partner: Webcams, PTZ cameras, keyboards, mice, USB microphones, Storage media, printers, scanners or touch-panel displays can be connected and controlled at a distance of up to 100 meters.
Connection via CAT6a cable
Data exchange and power supply of the receiver are carried out via a single CAT6a cable. This simplifies the installation avoids additional lines, since the receiver does not need any separate power supply. The communication between transmitter and receiver is done via USB 3.2 1st Gen 1 with transfer speeds of up to five Gbps. Older devices can also be integrated: The SpeaKa Professional SP-USB-830 USB 3.0 Extender is backward compatible to USB 2.0 and 1.1 and enables hardware acceleration for parallel and bulk data transfers.
USB-C and USB-A connections
The transmitter is equipped with a USB-C® computer connection, a USB-C® as well as a USB-B input. The receiver has one USB-C and three USB-A connectors. In addition, firmware upgrades can be done via the USB-C® service connection. The SpeaKa Professional SP-USB-830 USB 3.0 Extender supports automatic and manual switching, RS-232 pass-through and API-control as well as FSYNC GPIO pass-through for using an industrial camera. No drivers, downloads, or software required: Just plug and play and get started.
Delivery includes accessories
The delivery package contains everything necessary for immediate installation and start-up: USB 3.2 Gen 1 transmitter and receiver, the power supply unit, two 4-pin 3.5 mm Phoenix plugs, mounting bracket, machine screws and a user manual.

This text is machine translated.