1/2
StandexMeder Electronics MK06-10-E Reed switch 1 maker 200 V DC/AC 0.5 A 10 W
Product type
Reed switch
Contact type
1 maker
Switching voltage (max.)
200 V DC/AC
Switching current (max.)
0.5 A
Connection
THT
Datasheet (PDF)
Part number:
Item no:
Highlights & Details
Standex electronics reed sensor MK06 SPST-NO 0.5A 200V 10W AT25...30 THT
- MK_ series sensors are magnetically operated reed proximity switches. The actuating magnet as a counterpart is preferably fixed in the moving part of the device.
- Reed switches and permanent magnet must be at a certain distance from each other. Approaching or removing the magnet determine the closing and opening of the contact.
- The magnetic contact reaction/drop sensitivity is divided into different AW classes.
- The contact consists of ferromagnetic contact tabs that are gas-tight melted inside a glass tube.
- The ends overlap in parallel and form an air gap.
- Under the influence of a magnetic field the contact paddles accept opposite polarity and connect with sufficient force
- With solder pins
- This text is machine translated.
Our service for you
Technical specifications
- Contact: SPST-NO
- Decay time 0.05 ms
- Insulation resistance: 10¹⁰ ohm
- Static contact resistance, max. 150 mOhm
- Attraction excitation [AT]: 25...30
- Switching time including bouncing: 0.7 ms
- Product type
Reed switch
- Type
MK06-10-E
- Contact type
1 maker
- Switching voltage (max.)
200 V DC/AC
- Switching current (max.)
0.5 A
- Max. switching capacity
10 W
- Connection
THT
- RoHS-compliant
Yes
- Operating temperature
-20-70 °C
- Weight
1.3 g
Documents & Downloads
Datasheet
Datasheet 3846196 StandexMeder Electronics MK06-10-E Reed switch 1 maker 200 V DC/AC 0.5 A 10 W
User & Safety Instructions
User & Safety Instructions 3846196 StandexMeder Electronics MK06-10-E Reed switch 1 maker 200 V DC/AC 0.5 A 10 W