1/2
StandexMeder Electronics MK11-1A66B-500W Reed switch 1 breaker 200 V DC/AC 0.5 A 10 W
Product type
Reed switch
Contact type
1 breaker
Switching voltage (max.)
200 V DC/AC
Switching current (max.)
0.5 A
Connection
Open end cable
Datasheet (PDF)
Part number:
Item no:
Highlights & Details
Standex Electronics Reed sensor MK11 SPST-NC 0.5A 200V 10W AT15...20 with cable
- MK_ series sensors are magnetically operated reed proximity switches. The actuating magnet as a counterpart is preferably fixed in the moving part of the device.
- Reed switches and permanent magnet must be at a certain distance from each other. Approaching or removing the magnet determine the closing and opening of the contact.
- The magnetic contact reaction/drop sensitivity is divided into different AW classes.
- The contact consists of ferromagnetic contact tabs that are gas-tight melted inside a glass tube.
- The ends overlap in parallel and form an air gap.
- Under the influence of a magnetic field the contact paddles accept opposite polarity and connect with sufficient force.
- With cable LIZ 2x0.04qmm white, 5mm (±1mm) stripped and tin-plated
- This text is machine translated.
Our service for you
Technical specifications
- Contact: SPST-NC
- Decay time 0.05 ms
- Insulation resistance: 10¹⁰ ohm
- Static contact resistance, max. 150 mOhm
- Attraction excitation [AT]: 15...20
- Switching time including bouncing: 0.7 ms
- Product type
Reed switch
- Type
MK11-1A66B-500W
- Contact type
1 breaker
- Switching voltage (max.)
200 V DC/AC
- Switching current (max.)
0.5 A
- Max. switching capacity
10 W
- Connection
Open end cable
IP67
- RoHS-compliant
Yes
- Operating temperature
-30-70 °C
- Weight
5.3 g
Documents & Downloads
Datasheet
Datasheet 3846203 StandexMeder Electronics MK11-1A66B-500W Reed switch 1 breaker 200 V DC/AC 0.5 A 10 W
User & Safety Instructions
User & Safety Instructions 3846203 StandexMeder Electronics MK11-1A66B-500W Reed switch 1 breaker 200 V DC/AC 0.5 A 10 W