Image similar
Stiebel Eltron 205823 Heat mat TBSG 200/0.6 120 W 0.6 m²
EAN:
Part number:
Item no:
Technical specifications
- Width 400 mm
- Design: Heating cable
- Thickness: 3 mm
- Length: 1600 mm
- Self-adhesive: Yes
- With room thermostat: No.
- Power 200 W/m²
- Connection voltage 230 V
- Connected load 120 W
- With carrier mat: Yes
- Fixture of heat conductor: Sewed
- Thermal output load 9 W/m
- Resistance 441 ohms
- Number of PTC thermistors: 1
- Length of PTC thermistor: 4000 mm
- Suitable for humid rooms: Yes
- Suitable as open space heater: No.
- Suitable as a roof panel heater: No.
- Surface area: 0.6 m²
- With controller: No.
- With ground temperature sensor: No.
- Product type
Heat mat
- Operating voltage
230 V
- Suitable for
Tiles
- Heating area
0.6 m²
- Heating power (W / BTU/h)
120 W
- Heating power
120 W
- Lead length
4000 mm
- Compatible with
Underfloor heating
- Mounting height
3 mm
- Width
400 mm
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3549348 Stiebel Eltron 205823 Heat mat TBSG 200/0.6 120 W 0.6 m²
Description
The heating mats are used to temperature the floor in the wet area. They are suitable for both new buildings and renovations. The heating mats are installed directly below the flooring and quickly provide for a pleasantly warm floor surface. COMFORT FEATURES: Ideal for wellness areas, tiled shower tubs, reclining beds, benches or jacuzzis. The low overall height means it can be used in tile adhesive under ceramic coverings. Thanks to the small heat-conductor distance, the heating mats are suitable for uniform heating of small-format tiles and mosaic. High-quality heat conductor with FEP-insulation. INSTALLATION: In conjunction with a residual current protective device, the mat may be installed in the wet area under protection zone 0.
This text is machine translated.
This text is machine translated.