TRU COMPONENTS TC-12888628 Ferrule set 0.5 mm², 0.75 mm², 1 mm², 1.5 mm², 2.5 mm², 4 mm², 6 mm², 10 mm² Partially insula

These wire end sleeves are particularly suitable for hobbyists, professionals, field service, service workshops, electronics and laboratory use.
You get a 1800-piece premium wire end sleeve set for a range of cable cross-sections from 0.5 to 10 mm².
The supplied crimping pliers for wire end sleeves have an automatic adjustment to the sleeve diameters in a wide range of applications between 0.25 and 10 mm² conductor cross-section of the wire - with every new crimping procedure. The square clamp provides a secure contact with a strong joint and a consistently high quality during the crimping process. The automatic press mechanism is optimally calibrated at the factory, but can be fine-tuned to individual requirements. The ergonomic solid-plastic handle fits comfortably in your hand and allows a good grip. The pliers have a quick-locking safety lock and a low weight of only 404 g for fatigue-free working.
Technical data: Dielectric strength (max.) 440 V, material: Polyamide, copper alloy. The wire-end sleeves comply with RoHS guidelines and are CE compliant.
Further technical data for the included components are stated in the data sheet. Installation only by electricians.

Included: Practical assortment box, 60 200 wire-end sleeves yellow 6 1 mm2 (10 20 AWG), 100 wire-end sleeves red 4 mm2 (12 AWG), 450 wire-end sleeves gray 2.5 mm2 (14 AWG), 450 wire-end sleeves blue 1.5 mm2 (7 AWG), 40 wire-end sleeves gray 10 mm2 (16 AWG), 200 wire-end sleeves red 0.75 mm2 (18 AWG), 300 wire-end sleeves white 0.5 mm2 (22 AWG).

This text is machine translated.