• All things technology
  • Delivery within Europe
  • Right to Cancel applies
  • Specialist retailer since 1923
Start
Testing & Power SupplyTesters & MetersLaboratory EquipmentOscilloscopes

VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

EAN:
Part number:
Item no:
A portable oscilloscope with multiple control buttons and a screen displaying various waveform diagrams.
Digital multimeter shows a measured value of 1.5049 volts. Black and red test leads are shown on the right.
A portable oscilloscope with a digital screen displays a sine wave measurement. A probe is connected.
Digital multimeter with a colour display, showing multiple measurement curves and buttons for various measurements and settings.
Portable Handheld Oscilloscope Voltcraft DSO-2202H; displays signal progression on screen; buttons for voltage settings and measurement ranges.
Back of a VOLTCRAFT device with technical details and warning notices for usage and safety on the label.
A black device panel with three connections: 'CH1', 'CH2' and 'GEN Out', along with a label '400V CAT II'.
'Rear view of an electronic device with three connections: CH1, CH2 and GEN Out, labelled with 400V CAT II and 50Ω.'
A bench multimeter with a removable cover showing the 'POWER' and '1kHz' buttons; it also has USB and jack connections.
The image shows the back of a portable device with an open battery compartment. Two green batteries are visible.
A handheld device with a screen displays two overlapping waveforms in different colours. It has several buttons and ports at the bottom.
A portable oscilloscope measures electrical signals. The display shows a rectangular waveform. The device has various function buttons.
A handheld oscilloscope is measuring voltage values on a green circuit board. The screen displays an oscilloscope diagram.
Image of an oscilloscope display showing a sine wave at 1000.0 kHz with an amplitude of 10 Vpp and an offset of 10 mV.
'Oscilloscope display shows a sinusoidal wave.'
'Output: ON'. Display of a frequency generator: Freq 1,000.0 kHz, Vamp 10 mVpp, Offset 10 mV, Type 'Sinc'. Rectangular waveform graphic on the right.
'Oscilloscope screen displays a yellow sine wave with a frequency of 999.9 Hz and a voltage of 12.00 V on Channel 1.'
'Oscilloscope screen shows two waveforms: upper yellow sine wave and lower blue square wave. Axes indicate voltages.'
An oscilloscope displays a yellow sine wave at 999.9 Hz. Measurement values: 2.480 V voltage, with horizontal and vertical axes marked.
An oscilloscope shows two sine waves. The yellow line has an amplitude of 1.00V, the pink line also. The Y-axis shows voltage, the X-axis shows time.
Digital voltmeter displays reading: 0.0202 Volts in the alternating current range of 2V. Automatic mode activated.
'Oscilloscope display with two waveforms. Upper wave: 1000.0 Hz, lower waveform. Parameters: Vpp=6.560 V, T=1.000 ms.'
A hand is holding a portable measuring device with a screen and keypad, used for measuring electrical currents.
1/23
Datasheet (PDF)
Fast track dispatch on Tue 27 Oct
116 Piece(s)
Sales and shipping:
Conrad ElectronicTerms & Conditions
Number
Total (€ 419.00 / piece)
€ 419.00
prav.tax.untaxed incl. VAT 
plus € 19.99 
prav.priceAvailability.ecoparticipation.cost ...
prav.priceAvailability.privatecopyingfee.cost ...
without further shipping costs 
14-day return policy included
Report legal concerns

Highlights & Details

DSO-2202H + AFG DIGITAL OSCILLOSCOPE 3 IN 1

  • 3 in 1 - Oscilloscope, multimeter and waveform generator
  • 8.89 cm LCD color screen (320 x 240 pixels)
  • USB Type-C interface

Technical specifications

  • Max 10,000 WFM/s
Product type

Handheld oscilloscope

Bandwidth

200 MHz

Channel sample rate

1 GS/s

Displays

8.89 cm TFT LCD, 320 x 240 pixels

Resolution

8 Bit

Screen size

8.89 cm

Oscilloscope features

Handheld

Time base

2ns/div~1000s/div, step by 1 – 2 - 5

No. of analogue inputs

2

Manufacturer's standards (no certificate)

Reading category

CAT II 400 V

Vertical deflection

10mV/div~10V/div

Input impedance

1 MΩ±2%, parallel dazu 16 pF±10 pF

Input coupling

DC, AC, ground

Input voltage

400 V (DC + AC, PK - PK)

Power supply (details)

5V DC, 2A

Dim

(L x W x H) 198 x 38 x 96 mm

Weight

0.6 kg

Display

8.89 cm

Width

38 mm

Height

96 mm

Length

198 mm

Interfaces

USB device

Channel memory depth

8 KP

Type

DSO-2202H + AFG

Plastic free packaging

Plastic-free packaging

Compliance & Certifications

Certified by EU Garan

Documents & Downloads

Datasheet

Datasheet 2687724 VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

User & Safety Instructions

User & Safety Instructions 2687724 VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

Warranty Terms

Warranty Terms 2687724 VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

Download

Download 2687724 VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

Download 2687724 VOLTCRAFT DSO-2202H + AFG Handheld oscilloscope 200 MHz 2-channel 1 GS/s 8 KP 8 Bit Handheld 1 pc(s)

Description

The VOLTCRAFT DSO-2202H + AFG digital oscilloscope 3 in 1 impresses with a bandwidth of 200 MHz, 2 channels and a 8.89 cm LCD color display. The maximum sampling rate is 1 GS/s, the recording capacity is 8 K. The VOLTCRAFT digital oscilloscope works with 8-bit vertical resolution. The USB connection also serves for data storage.

This text is machine translated.

Features

  • Oscilloscope:
  • 200 MHz bandwidth , 2 channels
  • Max. 1 GSa/s sampling rate
  • Max. 8K record length
  • 8-bit vertical resolution
  • Multimeter:
  • CATII 1000 V
  • 20,000 Counts
  • Auto-range
  • TRMS
  • Measuring type - Voltage, current, resistance, capacitance, on/off, diode
  • Waveform generator:
  • Max. 25 MHz frequency output, 1 channel
  • Max. 125 MSa/s sampling rate
  • 0.1 Hz frequency resolution
  • 14-bit vertical resolution
  • 8K waveform length

Scope of delivery

  • Oscilloscope
  • Probes
  • Probe adjust tool
  • USB cable
  • Carrying bag
  • 2 x BNC to alligator clip cable
  • 1 x pair of Multimeter test leads (Red & Black)
  • Software + English manual on CD
  • Quick guide
  • Safety hint sheet

Accessories

(*All information is plus legal VAT)

The necessary accessories are required to use the article as described.

More interesting products

(*All information is plus legal VAT)