Buy VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

A Voltcraft VC40 socket tester with indicator lights for 'Correct', 'Missing Earth', 'Live Earth Reverse'. Displays safety status.

A socket tester indicates the status of earth, live, and neutral wires through LEDs. Device type: Voltcraft VC40.

Voltcraft VC40 testing device indicates correct wiring or faults such as missing earth connection or reversed phase using LED displays.

Round lid or cover with a central lever and two silver buttons. Small openings in the top right that resemble speakers.

Three white plug sockets on a grey wall with a digital meter plugged into the right-hand socket.

1/5

Our service for you

Datasheet (PDF)

764 Piece(s)

Sales and shipping:

Conrad Electronic Terms & Conditions

Quantity (Piece(s))

Savings

Package size (plus VAT.)

Volume discounts vary depending on the seller

You save € 0.00

Number

Piece(s)

Total (€ 21.84 / piece)

€

Report legal concerns

Highlights & Details

Power outlet tester VC40

Automatic test run
Finger contacts for Earth Conductor Test and FI testing
FI/RCD-Test with 30 mA
Acoustic signals

Technical specifications

Dim: (Ø x L) 67 mm x 69 mm

Weight: 80 g

(Ø): 67 mm

Length: 69 mm

Frequency range

V AC reading range

V DC reading range

: Manufacturer's standards (no certificate)

Reading category: CAT II 300 V

Reading type: FI
Phase

Type: VC40

Product type: Mains outlet tester

Documents & Downloads

Datasheet

Datasheet 1509105 VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

User & Safety Instructions

User & Safety Instructions 1509105 VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

Conformity certificate

Conformity certificate 1509105 VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

Warranty Terms

Warranty Terms 1509105 VOLTCRAFT VC40 Mains outlet tester CAT II 300 V

Description

The socket tester enables fast and safe testing of sockets. Check the wiringThe socket is checked for possible installation errors like swapping wires and breaks. The test result will be displayed optically and acoustically. If the wiring is okay, a permanent tone will be emitted and all LEDs will show the green light. Fault current protection testBy means of the contact contact, the inspection of the fault current protection is started. Residual current circuit breakers (FI) can be tested with a tripping current of 30 mA or more. The triggering time is automatically limited to 300 ms. This test can only be started to protect against personal injury and property damage if the device detects correct wiring.Hazard pulsating warning toneIn addition to the LED status display, a pulsating warning sound is generated in the event of dangerous errors. Missing, for B. The protective conductor (PE) or the voltage drop between PE and N is too large, the pulsating warning signal helps to detect the problem immediately. The same happens if the residual current circuit breaker (FI) does not trigger as prescribed.

This text is machine translated.