1/2
3D Xtech PVD1010750N FluorX™ PVDF Filament PVDF chemical-resistant, UV-resistant 1.75 mm 750 g Ecru, Ecru 1 pc(s)
EAN:
Part number:
Item no:
Number
Total (1 kg = € 268.89)
€ 201.67
plus VAT.
Highlights & Details
Filament 3DXTech FluorX™ PVDF, 1.75 mm, 750g
- High thermal properties: 130°C CUTExcellent resistance to a wide range of chemicals such as automotive fluids, oils, gases, lubricants, Fully halogenated hydrocarbons, alcohols, acids and basesNon-hygroscopic, does not absorb moisture. No drying required!Inherently UV-resistant with very stable H-F bonds.Low smoke and flame properties with a V-0 rated base resinLong-term hydrolytic stabilityResistant to nuclear radiationVery good abrasion resistance – similar to nylon and UHMW-PE for applications with hohem wear
Technical specifications
- Product type
Filament
- Filament material
PVDF
- Filament properties
chemical-resistant
UV-resistant
- Filament Ø
1.75 mm
- Filament colour
Ecru
Ecru
- Heated bed required
Yes
- Printing temperature (min.)
245 °C
- Max. printing temperature
265 °C
- Weight
750 g
- Content
1 pc(s)
Documents & Downloads
Security datasheet
Security datasheet 2632870 3D Xtech PVD1010750N FluorX™ PVDF Filament PVDF chemical-resistant, UV-resistant 1.75 mm 750 g Ecru, Ecru 1 pc(s)
Description
FluoroX™ PVDF [polyvinylidene fluoride] is manufactured from Arkema Kynar®. PVDF is an excellent choice for applications requiring chemical resistance, high heat resistance and superior abrasion resistance. Kynar® is a registered trademark of Arkema.
This text is machine translated.
This text is machine translated.
Hints
Extruder: Between 245 and 265°C, depending on the printer Some must reach up to 280°C.Heated bed 90 - 110 °C.Bed preparation: According to the manufacturer, Nano Polymer Adhesives provides the best results.Other: No or slow fan. Print at speeds of 40-60 mm/s as a good starting point.Drying instructions: PVDF does not absorb moisture and does not need to be dried!Safety note: This polymer begins to decompose and decompose at temperatures above 290 °C. Please keep your extruder temperature below this point to avoid degradation, output and loss of mechanical properties.