Axing BZU01002 SAT finder
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 144.99 / piece)
€ 144.99
incl. VAT
Only 1 Piece(s) available
Highlights & Details
Axing Easy to use, small level tester for digital cable TV systems
- For easy testing, level control and troubleshooting in case of cable connection / digital cable TV, the TV signal level is displayed via the LEDs (resolution 5 dBµV +/ 2.5 dB)
- Lets you test the level of your cable TV; the average level for each of the 5 channels is displayed in the VHF (258 -290 MHz) and UHF (398 -438 MHz) ranges
- Additional measurement in the range 5... 2700 MHz as total level (hold both buttons pressed, the level is read via the green scale), not suitable for DVB T
- Measuring range selective 60...105 dBµV (VHF D258 D290 / S15 S19 and UHF D402 D434 / S33 S37) as well as 80...125 dBµV broadband (5-2700 MHz)
- Power supply via 9V Block battery (not included in delivery), red LED display green for battery status, connection: F socket (30 cm F connection cable as well as adapter IEC socket is supplied)
Technical specifications
- Product type
SAT finder
- Display
Digital
- Min. frequency
5 MHz
- Max. frequency
2700 MHz
- Features
LED display
Beeper
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3779551 Axing BZU01002 SAT finder
User & Safety Instructions
User & Safety Instructions 3779551 Axing BZU01002 SAT finder
Description
This CATV signal tester is suitable for cable television systems that have been used purely for digital purposes. The device has 2 selective main measuring range (VHF and UHF, selectable via button). In addition, broadband can be measured over the entire frequency range (to do so, press both VHF and UHF at the same time). The signal tester is used at an antenna socket or multimedia connection socket, or at the output of a signal amplifier. The average level of 5 channels is displayed (VHF S14 to S19 or D) or UHF S33-S27 or D402-D434). In larger cable networks these channels are usually occupied to ensure an effective level indicator. The total level over the entire frequency range shows incorrectly set amplifiers or external radiation, for example through mobile telephony. The operation of the signal tester takes place via a 9 V battery (not included in the delivery). To indicate the battery status, an LED lights up in green (battery full), yellow (low battery) or red (low battery). The delivery includes a 30 cm cable with F-plugs as well as an adapter F-socket to IEC-socket. Dimension: 60 x 120 x 26 mm
This text is machine translated.
This text is machine translated.
Scope of delivery
- Patch cable F/F 30 cm, adapter IEC-socket to F-socket
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
