Name: Chauvin Arnoux E27 Clamp meter adapter A/AC reading range: 100 mA - 100 A A/DC reading range: 100 mA - 100 A
Brand: Chauvin Arnoux
SKU: 2446302
Availability: InStock

Highlights & Details

PLIERS E27 CVH OSCILLOSCOPE

N/A
Opening range of current clamps 11.8 mm

Technical specifications

Opening range of current clamps: 11.8 mm

Product type: Clamp meter adapter

Type B: BNC plug

: Manufacturer's standards (no certificate)

A AC reading range (min.): 100 mA

Amperage reading range AC (max.): 100 A

Amperage reading range DC (min.): 100 mA

A DC reading range (max.): 100 A

Dim: (L x W x H) 231 x 67 x 36 mm

Current reading: AC
DC

Reading category: CAT III 600 V
CAT IV 300 V

Weight: 0.33 kg

Output signal (max.): 1000 mV

Max. frequency: 100 kHz

Width: 67 mm

Height: 36 mm

Length: 231 mm

UKCA: not relevant

Documents & Downloads

Datasheet

Datasheet 2446302 Chauvin Arnoux E27 Clamp meter adapter A/AC reading range: 100 mA - 100 A A/DC reading range: 100 mA - 100 A

User & Safety Instructions

User & Safety Instructions 2446302 Chauvin Arnoux E27 Clamp meter adapter A/AC reading range: 100 mA - 100 A A/DC reading range: 100 mA - 100 A

Description

The E27 clamp-on ammeter is an insulated current transformer with Hall-Effect technology to display the shape and amplitude of DC and AC currents on oscilloscopes.
It has two measurement ranges to measure current strengths up to 100 A with a bandwidth up to 100 kHz.
The pliers E27 is powered independently of the mains by batteries or with a 5V standard power supply unit via a µUSB-interface, in addition it has an automatic DC zero point correction and an automatic cut-off when not in use.
With its 2 m long connection cable and the insulated BNC connector plug, it can be connected to any oscilloscope with standard connection technology. The clamp-on ammeter can be used with electrical installations of category 600V CAT III and 300V CAT IV.

This text is machine translated.

Scope of delivery

1 quick instructions
1 Safety data sheet
1 verification certificate
1 9 V battery

Description

The E27 clamp-on ammeter is an insulated current transformer with Hall-Effect technology to display the shape and amplitude of DC and AC currents on oscilloscopes.
It has two measurement ranges to measure current strengths up to 100 A with a bandwidth up to 100 kHz.
The pliers E27 is powered independently of the mains by batteries or with a 5V standard power supply unit via a µUSB-interface, in addition it has an automatic DC zero point correction and an automatic cut-off when not in use.
With its 2 m long connection cable and the insulated BNC connector plug, it can be connected to any oscilloscope with standard connection technology. The clamp-on ammeter can be used with electrical installations of category 600V CAT III and 300V CAT IV.

This text is machine translated.