Einhell TC-BD 500 Box column drill press 500 W 240 V

The Einhell TC-BD 500 pillar drill machine is a precision tool for special requirements: The extra-large 115 mm radius allows large workpieces made of wood or metal to be reliably fitted with precise holes. With 500 Watt power and 9-fold speed gradation from 300 to 2410 revolutions per minute, material-oriented and precise drilling is possible. The column drill can therefore be used at very low and very high speeds and is therefore ideal for hard materials such as metal, but also for soft materials such as wood. Exact drill holes are possible through the adjustable depth stop. The maximum drilling depth is 50 mm. The column drill machine has a robust toothed rim chuck and a MK2 holder, which allows Morse cone drill bits and the most common drills with a diameter of 1.5 mm to 13 mm. The ball-bearing drill spindle ensures long-life and easy operation. The column drill can be adjusted variably by the continuous height adjustment of the drilling table. In addition, the drilling table can be rotated up to 90° and tilted up to 45°. The rubber-coated, three-arm turnstile is proven by the favorable leverage effect at exact pressure without effort. The folding chip protection and the on/off switch with a zero-voltage release prevent the machine from starting up again unintentionally after a power failure ensure safety in use.

This text is machine translated.