Elmeko MSE 20, 24 V DC, 30 W Dehumidifier 24 V DC 30 W (W x H x D) 64 x 124 x 67 mm Piece 1 pc(s)

To avoid condensation in the control cabinet, we recommend the use of our switch cabinet dehumidifiers. The control cabinet air is routed in the inner circuit of the dehumidifier over a cold surface, which actively generates condensate. The condensate then flows down through the condensate hose. In the lower area of the control cabinet, a screw fitting or a drain element is installed to which the condensate hose can be connected.

The device can be fixed on a mounting rail TS 35 × 15 mm or alternatively with M4 screws through the holes provided in the device. The horizontal installation position with the hose connection downwards must be imperatively observed.
The condensate hose is pushed onto the hose connection at the bottom of the device and must be fed into a container below the device or through the cabinet wall to the outside. Ideally, an OUT-FIT element from an accessory is used for this purpose.
It is necessary to maintain a distance of at least 80 mm upwards and forwards from adjacent equipment in order not to affect the air inlet (top of the unit) and the air outlet (front).

This text is machine translated.