Name: Fluke Networks Pro3000 Kit PRO3000 Analog Tone and Probe, cable verifier, cable test device
Brand: Fluke Networks
SKU: 1195886
Availability: InStock

Highlights & Details

PRO3000 Analog Tone and Probe

Tone and trace wire on non-active networks

Technical specifications

Pro3000 Analog Tone and Probe:
User interface: Slide switch selects Continuity or Tone Mode, Push button switch selects SOLID, ALT or OFF
Tone mode LED, Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 VDC in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9 V alkali
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Pro3000 Analog sensor:
User interface: ON/OFF push button, Volume dial, Replaceable tip, 3.5 mm earphone jack
Battery: 9 V alkali
Temperatur: Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

Product type: Toner and probe kit

Function: Cable tracking

Max. cable length: 16 km

Acoustic signal: Yes

Display: Analogue

Optical display: Yes

Test sockets: RJ11

Dim: (L x W x H) 8 x 18 x 31 cm

Weight: 0.5 kg

Range: Networks

Width: 18 cm

Height: 31 cm

Length: 8 cm

Depth: 3.6 cm

Type: Pro3000 Kit

: Twisted Pair cable tester

UKCA: yes

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 1195886 Fluke Networks Pro3000 Kit PRO3000 Analog Tone and Probe, cable verifier, cable test device

Description

The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.

You can send this loud tone up to 10 miles (16 kilometers) on most cables! Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Features

Five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers on most cables)
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport.

Scope of delivery

Pro3000 Analog Tone and Probe.

Description

The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.

You can send this loud tone up to 10 miles (16 kilometers) on most cables! Attach the nylon pouch to your belt, and you will be equipped for any wire identification job.

Features

Five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers on most cables)
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport.