Name: Gedore 8013800 Puller Clamping range (details) 45 mm
Brand: Gedore
SKU: 1908233
Availability: BackOrder

1/5

Dispatches on Fri 30 Oct

16 Piece(s)

Sales and shipping:

Number

Piece(s)

Total (€ 109.99 / piece)

€ 109.99

incl. VAT

14-day return policy included

Technical specifications

1.30/7-GEDORE-internal puller 45-55 mm
For extremely tight fitting ball bearings, rings, bushings, and radial shaft seals
Operation:
The internal puller in the bearing imports and the spindle. The sharp approaches of the Shell Presses to get behind the tightening supply. Only then to rest. Feet parallel to the spindle align, this produces a rigid unit
The design can differ from the image
Can be used with slide hammer puller or against support

Documents & Downloads

User & Safety Instructions 1908233 Gedore 8013800 Puller Clamping range (details) 45 mm

Information 1908233 Gedore 8013800 Puller Clamping range (details) 45 mm

For extremely-tightly-packed ball bearings, bearing races, bushings, and shaft seals Simmering®
Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity.
The design can vary from the image
Can be used with either sliding hammer or counter-support brace * min. and max. dimension in idle and spread state

For extremely-tightly-packed ball bearings, bearing races, bushings, and shaft seals Simmering®
Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity.
The design can vary from the image
Can be used with either sliding hammer or counter-support brace * min. and max. dimension in idle and spread state